Wraps by car

Abarth Punto wrap

The Abarth Punto wrap page covers the Fiat-based hot hatch built from 2007 to 2014 in one generation. A full vinyl wrap on the newest body takes about 52 ft (16 m) of 60-inch (1.52 m) cast film. Chrome or patterned film adds roughly 9 ft (2.5 m) more because of extra material use.

1generations16 mof film for a full wrap

Abarth Punto, first generation, factory photo
Abarth Punto, first generation. Factory color shown.

Abarth Punto wrap colors and ideas

  • Punto black wrap
  • Punto white wrap
  • Punto gray wrap
  • Punto silver wrap
  • Punto red wrap
  • Punto blue wrap
  • Punto green wrap
  • Punto yellow wrap
  • Punto orange wrap
  • Punto purple wrap
  • Punto pink wrap
  • Punto teal wrap
  • Punto brown wrap
  • Punto gold wrap
  • Punto chrome wrap
  • Punto color shift wrap
  • Punto carbon fiber wrap
  • Punto camo and patterned wrap

How much vinyl to wrap an Abarth Punto

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2007–2014hatchback (3 or 5 doors)159.1 in (4,041 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m)

Punto wrap cost factors

Punto wrap cost depends on the film area of this 159.1 in (4,041 mm) mini hatchback and the work around its tailgate. The rear glass sits inside the tailgate, so the installer spends extra time trimming the film to the glass edge. Chrome or patterned film needs about 61 ft (18.5 m) instead of the standard 52 ft (16 m), which raises the material amount. The number of cut-outs for handles, mirrors, and badges also adds labor.

  • Film for a full wrap: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).
  • Body: hatchback (3 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Restyled in 2010, 2011: bumpers and lights differ between the versions, and so do the film cuts.

Punto wraps by generation

Swipe sideways. Tap a card for the full description.

Abarth Punto, first generation, factory photo
Factory color shown

2007–2014 Punto hatchback (first generation)

2007–2014hatchback (3 or 5 doors)159.1 in (4,041 mm)

The first generation Abarth Punto was produced from 2007 to 2014, with restyling in 2010 and 2011. Those restylings changed the bumpers and lights, so a film kit cut for a pre-2010 car will not fit a later one. The three-door and five-door hatchback bodies share the same front and rear ends after each restyle. An installer should confirm the production date before ordering a pre-cut kit.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).

Roof, hood, chrome delete and PPF on a Punto

A partial wrap on an Abarth Punto can be a roof, hood, or mirror caps in a contrasting film. Chrome delete on this car means covering the window trim and badges with black film. Paint protection film (PPF) is a clear film on the front end that leaves the original color visible. These smaller jobs use less material than a full wrap and still change or protect key areas.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an Abarth Punto: body, cut-outs and film

An Abarth Punto vinyl wrap is a color change job on a mini three-door or five-door hatchback body. The car is 159.1 in (4,041 mm) long, so a compact size keeps the film estimate at about 52 ft (16 m). The tailgate includes the rear glass, which means the film ends at the edge of the glass. The short roof and simple side panels make an even layout easier to plan.

Punto wrap ideas start with the tailgate, where the rear glass sits inside the panel and the film must be trimmed to its edge. The door handles, mirrors, and badges need cut-outs, so the installer works around them rather than removing every part. The bumpers are best partly disassembled for a clean wrap around the lower edges. The antenna and roof strips come off to avoid visible seams.

How much vinyl to wrap a Punto depends on the generation's details, and this car has only one generation from 2007 to 2014. The body was restyled in 2010 and 2011 with new bumpers and lights, so film cut for an early car does not fit a later one. The basic hatchback shape stays the same across all years, so the main film areas keep their size. A wrapper should measure the specific car anyway, because trim changes after restyling can shift the edges.

Questions about wrapping an Abarth Punto

How much vinyl does it take to wrap an Abarth Punto?

Yes, an Abarth Punto takes about 52 ft (16 m) of 60-inch (1.52 m) cast film for a full wrap. That estimate covers the 159.1 in (4,041 mm) long hatchback body. Chrome or patterned film needs about 61 ft (18.5 m) because the installer uses more material for alignment.

Which years of the Punto take the same film cuts?

The restyling years split the Punto into two groups for film cuts: 2007 to 2009 and 2010 to 2014. The 2010 and 2011 changes to bumpers and lights mean a film cut for one group does not fit the other. The basic body shell stays identical, but the pre-cut edges differ.

Can I wrap only the hood or the roof of a Punto?

Yes, a partial wrap on the hood or the roof of a Punto is a quick way to change one part. The roof is a single panel that can be wrapped without touching the tailgate. The hood has clear edges and no glass, so the installer works without cut-outs around glass.

Is a Punto hard to wrap?

A Punto is not especially hard to wrap, but the tailgate with its built-in rear glass adds careful trimming. The film must end at the edge of the glass, so the installer spends extra time on that panel. The car is 159.1 in (4,041 mm) long, which is a compact size that keeps the job manageable. Chrome or patterned film also demands more patience to align the pattern.