Wraps by car

Aion Hyper SSR wrap

The Aion Hyper SSR wrap page covers the Aion Hyper SSR coupe built from 2023 to now. This vinyl wrap guide covers the car's only generation, a two-door coupe that is 178.7 in (4,538 mm) long. A full wrap of the newest body takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, plan for about 57 ft (17.5 m).

1generations15.5 mof film for a full wrap

Aion Hyper SSR, first generation, factory photo
Aion Hyper SSR, first generation. Factory color shown.

Aion Hyper SSR wrap colors and ideas

  • Hyper SSR black wrap
  • Hyper SSR white wrap
  • Hyper SSR gray wrap
  • Hyper SSR silver wrap
  • Hyper SSR red wrap
  • Hyper SSR blue wrap
  • Hyper SSR green wrap
  • Hyper SSR yellow wrap
  • Hyper SSR orange wrap
  • Hyper SSR purple wrap
  • Hyper SSR pink wrap
  • Hyper SSR teal wrap
  • Hyper SSR brown wrap
  • Hyper SSR gold wrap
  • Hyper SSR chrome wrap
  • Hyper SSR color shift wrap
  • Hyper SSR carbon fiber wrap
  • Hyper SSR camo and patterned wrap

How much vinyl to wrap an Aion Hyper SSR

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2023–nowcoupe (2 doors)178.7 in (4,538 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)

Hyper SSR wrap cost factors

Hyper SSR wrap cost depends on the film type, the amount of body work, and the finish you choose. A full wrap on this coupe takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film, so a chrome or patterned film at about 57 ft (17.5 m) uses more material. The two long side doors are each one large piece of film, which adds labor time. The charge port door is wrapped as a small piece of its own, which adds a cut-out step.

  • Film for a full wrap: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.
  • Electric car: the charge port door is wrapped as a small piece of its own.

Hyper SSR wraps by generation

Swipe sideways. Tap a card for the full description.

Aion Hyper SSR, first generation, factory photo
Factory color shown

2023–now Hyper SSR coupe (first generation)

2023–nowcoupe (2 doors)178.7 in (4,538 mm)

The first generation Aion Hyper SSR is a coupe with two doors, sold from 2023 to now. The body is 178.7 in (4,538 mm) long, so a full wrap uses about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. Each long side door is one large piece of film, so the installer needs long sections without seams. A chrome or patterned film would need about 57 ft (17.5 m) because the pattern repeat uses more material.

Two long side doors: each door is one large piece of film.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Roof, hood, chrome delete and PPF on a Hyper SSR

A partial wrap on a Hyper SSR can cover the roof, hood, or mirror caps. Hyper SSR chrome delete covers the window trim and badges with black film, which is a smaller job than a full color change wrap. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips. The charge port door can also be wrapped on its own as a small accent piece.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an Aion Hyper SSR: body, cut-outs and film

An Aion Hyper SSR vinyl wrap is shaped by the coupe's long doors and low roof. The car has two long side doors, and each door is one large piece of film. The body length of 178.7 in (4,538 mm) means a full wrap uses about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. The coupe roof is a single panel, so it wraps as one clean piece.

Hyper SSR wrap ideas start with the electric car's charge port door, which is wrapped as a small piece of its own. The door handles and mirrors come off for a cleaner edge. The front and rear bumpers need relief cuts around the sensors and vents. The charge port door is cut out and wrapped separately, so the film edge stays hidden.

How much vinyl to wrap a Hyper SSR depends on the generation you own. This page covers one generation, the first, sold from 2023 to now. The only body is the coupe, which is 178.7 in (4,538 mm) long. No earlier or later body changes the film estimate of about 51 ft (15.5 m) of 60-inch (1.52 m) cast film.

Questions about wrapping an Aion Hyper SSR

How much vinyl does it take to wrap an Aion Hyper SSR?

A full wrap of an Aion Hyper SSR takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. If you use chrome or patterned film, plan for about 57 ft (17.5 m). The car is a coupe with two long side doors, so the film is used in large pieces.

Can I wrap only the hood or the roof of a Hyper SSR?

Yes, you can wrap only the hood or the roof of a Hyper SSR. A partial wrap covers the roof, hood, or mirror caps, and it uses much less film than a full wrap. The roof is a single coupe panel, so it is a clean job for one piece of film.

Is a Hyper SSR hard to wrap?

A Hyper SSR is not hard to wrap for a trained installer, but the long doors add work. Each door is one large piece of film, so it takes care to avoid wrinkles and stretch marks. The electric car's charge port door is wrapped as a small piece of its own, which adds a precise cut-out step. The body is 178.7 in (4,538 mm) long, so a full wrap uses about 51 ft (15.5 m) of film.

How many generations of the Hyper SSR does this page cover?

This page covers one generation of the Hyper SSR, the first generation sold from 2023 to now. There are no earlier or later generations in this catalog. All information here is for the coupe body of that generation.