An Aiways U5 wrapped in chrome turns the factory panels into one continuous reflector. Start with the finish, because silver chrome reads as liquid metal while tinted chrome adds color to the reflection. Then pick a film line within the finish: within the same look, films differ in how they handle the car's curves and edges. A color change wrap in chrome covers the painted surfaces only, so the roof rails, glass and trims keep their original contrast.
Factory paint on the Aiways U5 stays under the film and must be clean and smooth before the wrap. Seams in chrome follow the body lines and the edges of panels, and on this car the tailgate seam ends at the rear glass. The roof seam runs along the roof rails, because every trim has rails that are either removed or cut around. Chrome film has less tolerance for stretching than gloss colors, so the installer plans seams where the film can lay flat.
A chrome wrap on the Aiways U5 is removable and the film is designed to be taken off later. The charge port door is wrapped as a small piece of its own, so it can be opened without lifting the quarter panel film. Hand wash the car after the wrap and avoid automated brushes that can scratch the mirror finish. Use a pH-neutral soap and a soft mitt, and rinse from the top down to keep the film clean.