Wraps by car

AMC Hornet wrap

This page covers the AMC Hornet wrap for the first generation, built from 1974 to 1975. The catalog includes one generation of this car. A full wrap of the hatchback body takes about 52 ft (16 m) of 60-inch (1.52 m) cast vinyl wrap.

1generations16 mof film for a full wrap

AMC Hornet, first generation, factory photo
AMC Hornet, first generation. Factory color shown.

AMC Hornet wrap colors and ideas

  • Hornet black wrap
  • Hornet white wrap
  • Hornet gray wrap
  • Hornet silver wrap
  • Hornet red wrap
  • Hornet blue wrap
  • Hornet green wrap
  • Hornet yellow wrap
  • Hornet orange wrap
  • Hornet purple wrap
  • Hornet pink wrap
  • Hornet teal wrap
  • Hornet brown wrap
  • Hornet gold wrap
  • Hornet chrome wrap
  • Hornet color shift wrap
  • Hornet carbon fiber wrap
  • Hornet camo and patterned wrap

How much vinyl to wrap an AMC Hornet

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1974–1975hatchback (3 doors)179.3 in (4,554 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m)

Hornet wrap cost factors

The Hornet wrap cost depends on the amount of film, the finish you choose, and the labor for the body of this car. A full wrap uses about 52 ft (16 m) of 60-inch (1.52 m) cast film, or about 61 ft (18.5 m) with chrome or patterned film. The size of the hatchback and the large door panels affect how much time the installer spends. The condition of the paint and any repairs will also change the final cost.

  • Film for a full wrap: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).
  • Body: hatchback (3 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Two long side doors: each door is one large piece of film.

Hornet wraps by generation

Swipe sideways. Tap a card for the full description.

AMC Hornet, first generation, factory photo
Factory color shown

1974–1975 Hornet hatchback (first generation)

1974–1975hatchback (3 doors)179.3 in (4,554 mm)

The first generation AMC Hornet (1974–1975) is an older car, so paint age matters before a wrap. Panels may be original or repainted, and a test spot comes before a full wrap. You should check for rust, dents, or peeling clear coat, because film will not hide these problems. If the paint is too weak, the film may pull it off when removed.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).

Roof, hood, chrome delete and PPF on a Hornet

For a partial wrap on an AMC Hornet, you can cover the roof, hood, or mirror caps. A Hornet chrome delete covers the window trim and badges with black film. You can also have paint protection film (PPF), which is clear film on the front end. These smaller jobs let you change the look without a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an AMC Hornet: body, cut-outs and film

The AMC Hornet vinyl wrap suits a car with a single body style: a three-door hatchback. Its length of 179.3 in (4,554 mm) means the roof and sides are long panels that need careful handling. The hatchback shape leaves no separate trunk lid, so the rear is one large section. Because the car has only two doors, each side is covered with fewer, larger pieces.

For Hornet wrap ideas, pay attention to the tailgate with the rear glass in it: the film ends at the edge of the glass. The two long side doors are each one large piece of film, so they need a steady hand to avoid wrinkles. No other parts are listed as needing removal or cut-outs for this body.

If you want to know how much vinyl to wrap a Hornet, this page covers only the first generation (1974–1975). The catalog lists a single generation for this car, so there are no changes between generations to compare. You will not need to allow extra film for a different body style or size.

More AMC wraps

Questions about wrapping an AMC Hornet

How much vinyl does it take to wrap an AMC Hornet?

It takes about 52 ft (16 m) of 60-inch (1.52 m) vinyl to wrap an AMC Hornet. That figure is for the first generation hatchback body using cast film. If you choose chrome or patterned film, allow about 61 ft (18.5 m).

Can I wrap only the hood or the roof of a Hornet?

Yes, you can wrap only the hood or the roof of a Hornet. Partial wrap options for this car include the roof, hood, and mirror caps. You can also do a chrome delete on the window trim and badges, or add paint protection film to the front end.

Is a Hornet hard to wrap?

A Hornet is not especially hard to wrap, but it has a few points that add work. The tailgate with the rear glass in it means the film ends at the edge of the glass, so you need a careful trim line. The two long side doors are each one large piece of film, which takes practice to lay smoothly. The hatchback shape and the car's length also mean more square footage to cover.

How many generations of the Hornet does this page cover?

This page covers one generation of the Hornet. The first generation was produced from 1974 to 1975.