Wraps by car

Apal GT Horizon wrap

The Apal GT Horizon wrap page covers the first generation of the Apal GT Horizon, the 1968–1969 coupe. A full color change wrap on this sports car uses about 39 ft (12 m) of 60-inch (1.52 m) cast film. With chrome or patterned film, plan on about 48 ft (14.5 m). This guide explains what the wrap involves.

1generations12 mof film for a full wrap

Apal GT Horizon, first generation, factory photo
Apal GT Horizon, first generation. Factory color shown.

Apal GT Horizon wrap colors and ideas

  • GT Horizon black wrap
  • GT Horizon white wrap
  • GT Horizon gray wrap
  • GT Horizon silver wrap
  • GT Horizon red wrap
  • GT Horizon blue wrap
  • GT Horizon green wrap
  • GT Horizon yellow wrap
  • GT Horizon orange wrap
  • GT Horizon purple wrap
  • GT Horizon pink wrap
  • GT Horizon teal wrap
  • GT Horizon brown wrap
  • GT Horizon gold wrap
  • GT Horizon chrome wrap
  • GT Horizon color shift wrap
  • GT Horizon carbon fiber wrap
  • GT Horizon camo and patterned wrap

How much vinyl to wrap an Apal GT Horizon

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1968–1969coupe (2 doors)167.3 in (4,250 mm)about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m)

GT Horizon wrap cost factors

GT Horizon wrap cost depends on the size of the car, the film type, and the work on the doors. The coupe uses about 39 ft (12 m) of standard cast film, or about 48 ft (14.5 m) of chrome or patterned film for a full wrap. Door handle cut-outs and the two long side doors add labor. Paint age can also affect preparation work.

  • Film for a full wrap: about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

GT Horizon wraps by generation

Swipe sideways. Tap a card for the full description.

Apal GT Horizon, first generation, factory photo
Factory color shown

1968–1969 GT Horizon coupe (first generation)

1968–1969coupe (2 doors)167.3 in (4,250 mm)

The first generation Apal GT Horizon was produced from 1968 to 1969 as a two-door coupe. On a car of these years, panels may be original or repainted, so a test spot comes before a full wrap. The paint surface may vary from panel to panel, and the wrap film will follow that. A test spot shows how the film adheres before the installer commits to the whole body.

Two long side doors: each door is one large piece of film.

Film: about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m).

Roof, hood, chrome delete and PPF on a GT Horizon

A partial wrap on the GT Horizon can cover the roof, hood, or mirror caps. GT Horizon chrome delete covers window trim and badges with black film. Paint protection film (PPF) can be applied as clear film on the front end. These jobs use less material than a full wrap but still need careful trimming.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an Apal GT Horizon: body, cut-outs and film

The Apal GT Horizon vinyl wrap covers a single body style: a two-door coupe that is 167.3 in (4,250 mm) long. Its compact size keeps material needs moderate for a full wrap. The two long side doors are each one large piece, so the side panels take wide film without seams.

GT Horizon wrap ideas begin with the two long side doors: each door is one large piece of film. That means door handle cut-outs and mirror bases need careful trimming. No other removable parts are listed, so most trim can stay in place. A clean edge around the door openings keeps the wrap looking factory.

How much vinyl to wrap a GT Horizon is set by this single generation. The 1968–1969 car is the only body in the catalog, so there is no difference between generations to count. If you replace a panel from another year, keep the same film estimate in mind. Paint condition can affect how the film lays down.

Questions about wrapping an Apal GT Horizon

How much vinyl does it take to wrap an Apal GT Horizon?

A full wrap on an Apal GT Horizon takes about 39 ft (12 m) of 60-inch (1.52 m) cast film. If you use chrome or patterned film, the estimate rises to about 48 ft (14.5 m). These figures are for the 1968–1969 coupe, the only generation in this catalog.

Can I wrap only the hood or the roof of a GT Horizon?

Yes, you can wrap only the hood or the roof of a GT Horizon. A partial wrap on this car can cover the roof, hood, or mirror caps. For chrome trim, a chrome delete covers window trim and badges. Clear paint protection film (PPF) can be applied on the front end.

Is a GT Horizon hard to wrap?

The GT Horizon has a few points that add work to a wrap. The two long side doors are each one large piece of film, so they need careful handling. The coupe is 167.3 in (4,250 mm) long, which is compact, but the length of each door means a large sheet is stretched in one go. A test spot is wise because paint age on a 1968–1969 car can vary.

How many generations of the GT Horizon does this page cover?

This page covers one generation of the GT Horizon. The catalog lists only the first generation, produced from 1968 to 1969. No other generations are included in this guide.