Wraps by car

Arcfox Alpha T wrap

This page covers the Arcfox Alpha T wrap, a vinyl wrap job on a battery-electric mid-size SUV in production since 2020. The Alpha T is in its first generation, sold from 2020 to the present as a five-door SUV. A full wrap of this body uses about 56 ft (17 m) of 60-inch (1.52 m) cast film, or about 62 ft (19 m) if you choose chrome or patterned film.

1generations17 mof film for a full wrap

Arcfox Alpha T, first generation, factory photo
Arcfox Alpha T, first generation. Factory color shown.

Arcfox Alpha T wrap colors and ideas

  • Alpha T black wrap
  • Alpha T white wrap
  • Alpha T gray wrap
  • Alpha T silver wrap
  • Alpha T red wrap
  • Alpha T blue wrap
  • Alpha T green wrap
  • Alpha T yellow wrap
  • Alpha T orange wrap
  • Alpha T purple wrap
  • Alpha T pink wrap
  • Alpha T teal wrap
  • Alpha T brown wrap
  • Alpha T gold wrap
  • Alpha T chrome wrap
  • Alpha T color shift wrap
  • Alpha T carbon fiber wrap
  • Alpha T camo and patterned wrap

How much vinyl to wrap an Arcfox Alpha T

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2020–nowSUV (5 doors)188.5 in (4,788 mm)about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m)

Alpha T wrap cost factors

Alpha T wrap cost depends on the film you choose, the number of pieces with cut-outs, and the shop's labor rate for a body of this size. A cast film wrap uses about 56 ft (17 m) of material, while chrome or patterned film uses about 62 ft (19 m). The panoramic glass roof reduces wrapped area slightly, but flush handles and sensors add labor.

  • Film for a full wrap: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Every trim has a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.
  • Every trim has a sunroof: the roof film is cut around its opening.
  • Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Every trim has flush door handles: each handle is wrapped as a small piece of its own.
  • Some trims have parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Electric car: the charge port door is wrapped as a small piece of its own.

Alpha T wraps by generation

Swipe sideways. Tap a card for the full description.

Arcfox Alpha T, first generation, factory photo
Factory color shown

2020–now Alpha T SUV (first generation)

2020–nowSUV (5 doors)188.5 in (4,788 mm)

The first generation of the Alpha T runs from 2020 to the present, and the glass roof is a fixed part of its design. The roof is not wrapped, so it stays dark whatever the color of the film, and the film ends at the roof rails. This means you do not need to order film for the center of the roof.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Every trim has a sunroof: the roof film is cut around its opening.

Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.

Every trim has flush door handles: each handle is wrapped as a small piece of its own.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).

Roof, hood, chrome delete and PPF on an Alpha T

A partial wrap on an Alpha T typically covers the hood, mirror caps, and tailgate, which are the panels most exposed to stone chips and sun. Chrome delete is done on the window trim and badges, using black film to cover the bright trim. Paint protection film (PPF) is clear film applied to the front end to guard against impact without changing the color.

  • Partial wrap: hood, mirror caps, tailgate.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an Arcfox Alpha T: body, cut-outs and film

An Arcfox Alpha T vinyl wrap covers a long, tall body, so expect to use the full film estimate and allow extra time for the roof. The SUV measures 188.5 in (4,788 mm) long, with five doors and a large glass area that is not wrapped. Because every trim has a panoramic glass roof, the roof film is limited to the roof rails area and around the sunroof opening.

When planning Alpha T wrap ideas, remember that flush door handles, cameras, sensors, and the charge port door need cut-outs or separate pieces. The roof rails come off before the roof is wrapped, or the film is cut along them. The tailgate includes the rear glass, so the film ends at the edge of the glass.

To know how much vinyl to wrap an Alpha T, you only need the first generation, since there are no earlier or later bodies to compare. The catalog lists one generation from 2020 to now, so the film estimate stays the same for all years. If you are ordering film, plan on about 56 ft (17 m) of 60-inch cast film for a color change.

Questions about wrapping an Arcfox Alpha T

How much vinyl does it take to wrap an Arcfox Alpha T?

It takes about 56 ft (17 m) of 60-inch (1.52 m) cast film to wrap an Arcfox Alpha T in a solid color. If you use chrome or patterned film, plan on about 62 ft (19 m) because of pattern matching and extra waste.

Can the roof of an Alpha T be wrapped?

No, the roof of an Alpha T cannot be wrapped because every trim has a panoramic glass roof. The film ends at the roof rails, so the glass stays as it is.

Can I wrap only the hood or the roof of an Alpha T?

Yes, you can wrap only the hood or the roof of an Alpha T. A partial wrap often covers the hood, mirror caps, and tailgate, while the roof is usually left alone unless you are doing a chrome delete on the rails.

Is an Alpha T hard to wrap?

Yes, an Alpha T is harder to wrap than a typical SUV because of its flush door handles, cameras, sensors, and the large glass roof. Each flush handle must be wrapped as a separate piece, and the charge port door also needs its own piece. The panoramic roof means the film ends at the rails, but the sunroof opening still requires careful cutting.