Wraps by car

Bertone Freeclimber wrap

This page covers the Bertone Freeclimber vinyl wrap for the two generations built from 1989 to 1995. The first generation ran from 1989 to 1992 and the second from 1992 to 1995, both as a three-door SUV. A full wrap of the newest body takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film, or about 61 ft (18.5 m) of chrome or patterned film.

2generations16.5 mof film for a full wrap

Bertone Freeclimber, second generation, factory photo
Bertone Freeclimber, second generation. Factory color shown.

Bertone Freeclimber wrap colors and ideas

  • Freeclimber black wrap
  • Freeclimber white wrap
  • Freeclimber gray wrap
  • Freeclimber silver wrap
  • Freeclimber red wrap
  • Freeclimber blue wrap
  • Freeclimber green wrap
  • Freeclimber yellow wrap
  • Freeclimber orange wrap
  • Freeclimber purple wrap
  • Freeclimber pink wrap
  • Freeclimber teal wrap
  • Freeclimber brown wrap
  • Freeclimber gold wrap
  • Freeclimber chrome wrap
  • Freeclimber color shift wrap
  • Freeclimber carbon fiber wrap
  • Freeclimber camo and patterned wrap

How much vinyl to wrap a Bertone Freeclimber

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1992–1995SUV (3 doors)157.3 in (3,995 mm)about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m)
1989–1992SUV (3 doors)157.3 in (3,995 mm)about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m)

Freeclimber wrap cost factors

The Freeclimber wrap cost depends on the size of the vehicle at 157.3 in (3,995 mm) long and the amount of film needed for a full wrap. Chrome or patterned film adds about 7 ft (2 m) compared to cast film, so material choice changes the cost. Panel condition also matters because older paint may need more preparation before the film is applied.

  • Film for a full wrap: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).
  • Body: SUV (3 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Two long side doors: each door is one large piece of film.

Freeclimber wraps by generation

Swipe sideways. Tap a card for the full description.

Bertone Freeclimber, second generation, factory photo
Factory color shown

1992–1995 Freeclimber SUV (second generation)

1992–1995SUV (3 doors)157.3 in (3,995 mm)

The second generation Bertone Freeclimber from 1992 to 1995 may have original or repainted panels, so a test spot comes before a full wrap. Older paint can be brittle or uneven, and a small test patch shows whether the film will bond cleanly. The installer checks each panel for adhesion before committing to the full coverage.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

Film: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).

Bertone Freeclimber, first generation, factory photo
Factory color shown

1989–1992 Freeclimber SUV (first generation)

1989–1992SUV (3 doors)157.3 in (3,995 mm)

The first generation Bertone Freeclimber from 1989 to 1992 has the same size and body style as the later cars, so the amount of film and the number of panels do not change. You still need about 54 ft (16.5 m) of 60-inch (1.52 m) cast film for a full wrap. The two long side doors and the tailgate with the rear glass are the same on this generation.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

Film: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).

Roof, hood, chrome delete and PPF on a Freeclimber

A partial wrap on a Bertone Freeclimber can cover the roof, hood, or mirror caps, and a chrome delete covers the window trim and badges. Paint protection film (PPF) is a clear film that can be applied to the front end to guard against stone chips. The Freeclimber chrome delete is a smaller job that changes the look of the bright trim.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Bertone Freeclimber: body, cut-outs and film

The Bertone Freeclimber vinyl wrap fits a three-door SUV body that is 157.3 in (3,995 mm) long. The two long side doors are each large single pieces of film, which makes the sides straightforward to cover. The tailgate includes the rear glass, so the film ends at the edge of the glass rather than wrapping around it.

Freeclimber wrap ideas include covering the two long side doors in one large piece of film each to keep the sides clean. The tailgate has the rear glass in it, and the film ends at the edge of the glass to avoid cut-outs. Removing the badges and window trim makes a chrome delete (bright trim covered with black film) neater.

How much vinyl to wrap a Freeclimber stays the same across both generations because the body is identical in size and shape. The length is 157.3 in (3,995 mm) for every car, and the three-door body has the same number of panels. The film estimate is about 54 ft (16.5 m) of 60-inch (1.52 m) cast film for a full wrap.

More Bertone wraps

Questions about wrapping a Bertone Freeclimber

How much vinyl does it take to wrap a Bertone Freeclimber?

It takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film to wrap a Bertone Freeclimber, or about 61 ft (18.5 m) of chrome or patterned film. The estimate is for a full wrap of the newest body, and both generations are the same size and shape.

Can I wrap only the hood or the roof of a Freeclimber?

Yes, you can wrap only the hood or the roof of a Freeclimber. A partial wrap on a Bertone Freeclimber can cover the roof, hood, or mirror caps, and a chrome delete covers the window trim and badges. Paint protection film (PPF) is also an option for just the front end.

Is a Freeclimber hard to wrap?

A Freeclimber is not hard to wrap, but two features add work: the two long side doors are each one large piece of film, and the tailgate has the rear glass in it. The size at 157.3 in (3,995 mm) long is manageable, and the film ends at the edge of the glass on the tailgate.

How many generations of the Freeclimber does this page cover?

This page covers two generations of the Bertone Freeclimber. The first generation is from 1989 to 1992 and the second from 1992 to 1995, both with the same three-door SUV body and length.