Wraps by car

Brabham BT62 wrap

The Brabham BT62 wrap page covers this track-focused sports car in its first generation, produced from 2020 to now, and a full vinyl wrap of the coupe takes about 49 ft (15 m) of 60-inch (1.52 m) cast film.

1generations15 mof film for a full wrap

Brabham BT62, first generation, factory photo
Brabham BT62, first generation. Factory color shown.

Brabham BT62 wrap colors and ideas

  • Brabham BT62 black wrap
  • Brabham BT62 white wrap
  • Brabham BT62 gray wrap
  • Brabham BT62 silver wrap
  • Brabham BT62 red wrap
  • Brabham BT62 blue wrap
  • Brabham BT62 green wrap
  • Brabham BT62 yellow wrap
  • Brabham BT62 orange wrap
  • Brabham BT62 purple wrap
  • Brabham BT62 pink wrap
  • Brabham BT62 teal wrap
  • Brabham BT62 brown wrap
  • Brabham BT62 gold wrap
  • Brabham BT62 chrome wrap
  • Brabham BT62 color shift wrap
  • Brabham BT62 carbon fiber wrap
  • Brabham BT62 camo and patterned wrap

How much vinyl to wrap a Brabham BT62

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2020–nowcoupe (2 doors)175.6 in (4,460 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m)

Brabham BT62 wrap cost factors

Brabham BT62 wrap cost depends on the film you choose and how much of the car you cover, rather than on a fixed price list. A standard color change wrap uses about 49 ft (15 m) of cast film, while a chrome or patterned film raises the amount to about 56 ft (17 m) and costs more per foot. The coupe body has many complex curves, so the shop time for cutting and fitting is a large part of the total.

  • Film for a full wrap: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Brabham BT62 wraps by generation

Swipe sideways. Tap a card for the full description.

Brabham BT62, first generation, factory photo
Factory color shown

2020–now Brabham BT62 coupe (first generation)

2020–nowcoupe (2 doors)175.6 in (4,460 mm)

The first generation Brabham BT62 is a coupe with two doors, measuring 175.6 in (4,460 mm) in length. The body style means the roof and the rear deck are one continuous surface, which reduces panel seams but requires a long, uninterrupted piece of film. The two long side doors are each one large piece of film, so the total film count is about 49 ft (15 m) for a standard wrap.

Two long side doors: each door is one large piece of film.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).

Roof, hood, chrome delete and PPF on a Brabham BT62

A partial wrap on the Brabham BT62 can be limited to the roof, hood, or mirror caps, which uses less film and shows off the original paint elsewhere. A chrome delete covers the window trim and badges with black film, changing the brightwork without a full color change. Paint protection film (PPF) is another option, with a clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Brabham BT62: body, cut-outs and film

A Brabham BT62 vinyl wrap starts with the coupe body style and its 175.6 in (4,460 mm) length, which puts the job in the range of a modern supercar. The two doors are long panels that each take one large piece of film, so the wrap uses fewer seams than on a four-door car. Because the car is low and wide, a full wrap needs two installers to handle the roof and the large side sections without stretching the film.

Brabham BT62 wrap ideas often include the large rear wing, the front splitter, and the side skirts, which need separate pieces and careful trimming around their edges. The two long side doors are each one large piece of film, so an installer must position them perfectly before squeegeeing. The mirror caps come off for a clean wrap, while the door handles are removed and the window trim is wrapped in place.

Since this page covers only the first generation of the Brabham BT62, from 2020 to now, the amount of film does not change between generations. The coupe body is the only style listed, so no separate estimates for a convertible or a different roofline are needed. If you are counting how much vinyl to wrap a Brabham BT62, use the figure of about 49 ft (15 m) for a standard color change.

Questions about wrapping a Brabham BT62

How much vinyl does it take to wrap a Brabham BT62?

Yes, a full vinyl wrap of a Brabham BT62 takes about 49 ft (15 m) of 60-inch (1.52 m) cast film. That estimate is for the first generation coupe body and assumes a standard color change wrap with no extra chrome or patterned film.

Can I wrap only the hood or the roof of a Brabham BT62?

Yes, you can wrap only the hood or the roof of a Brabham BT62 as a partial wrap. The same job list includes mirror caps and a front-end clear paint protection film, so any single panel is possible.

Is a Brabham BT62 hard to wrap?

The Brabham BT62 is hard to wrap because of its low, wide body and long side doors that each need one large piece of film. The rear wing, splitter, and side skirts add many small, curved pieces that require careful trimming and repositioning.

How many generations of the Brabham BT62 does this page cover?

This page covers one generation of the Brabham BT62, the first generation produced from 2020 to now. The catalog lists a single body style, a coupe with two doors, and the film estimate is based on that body.