Choosing a BYD ETP3 wrapped in teal starts with finish, then film, then deciding between a full color change or partial panels. The finish sets the look: matte and satin mute reflections, gloss deepens the color, and metallic or pearl adds shimmer. Then pick a film in that finish from the brands shown on this page. Last, decide if the whole van changes color or only the roof, hood and mirrors.

Factory paint on the BYD ETP3 stays untouched under the wrap, but seams decide clean installation. The sliding door tracks force cuts near the doors, so the film’s edge is placed away from that moving area. The charge port door is wrapped as a small separate piece, leaving a visible seam around it. Good installers keep these seams straight and tucked away from heavy wear.

A teal wrap on the BYD ETP3 is removable, and a hand wash keeps it looking right. Use a pH-neutral soap and a soft mitt, because pressure washing can lift film edges. Avoid automatic car washes with brushes. If the wrap is ever removed, the original paint is revealed again.