Wraps by car

Caterham Seven wrap

This page covers a Caterham Seven wrap on the current first-generation car built from 1992 onward. A full vinyl wrap of the newest convertible body takes about 33 ft (10 m) of 60-inch (1.52 m) cast film. Chrome or patterned film requires about 38 ft (11.5 m) because of waste and matching.

1generations10 mof film for a full wrap

Caterham Seven, first generation, factory photo
Caterham Seven, first generation. Factory color shown.

Caterham Seven wrap colors and ideas

  • Seven black wrap
  • Seven white wrap
  • Seven gray wrap
  • Seven silver wrap
  • Seven red wrap
  • Seven blue wrap
  • Seven green wrap
  • Seven yellow wrap
  • Seven orange wrap
  • Seven purple wrap
  • Seven pink wrap
  • Seven teal wrap
  • Seven brown wrap
  • Seven gold wrap
  • Seven chrome wrap
  • Seven color shift wrap
  • Seven carbon fiber wrap
  • Seven camo and patterned wrap

How much vinyl to wrap a Caterham Seven

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1992–nowconvertible (2 doors)133.1 in (3,380 mm)about 33 ft (10 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 38 ft (11.5 m)

Seven wrap cost factors

What a Seven wrap cost depends on is the amount of film, the labor hours, and the finish you choose. The car needs about 33 ft (10 m) of cast film, and a small body with a tight cockpit takes steady hand work. Adding chrome delete or paint protection film changes the material and time, but no fixed price is set here.

  • Film for a full wrap: about 33 ft (10 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 38 ft (11.5 m).
  • Body: convertible (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Seven wraps by generation

Swipe sideways. Tap a card for the full description.

Caterham Seven, first generation, factory photo
Factory color shown

1992–now Seven convertible (first generation)

1992–nowconvertible (2 doors)133.1 in (3,380 mm)

On the first generation Seven, the open top is not wrapped in film. The fabric top is left uncovered, and the film ends exactly where the top begins. If the car has a folding hard top, those panels are wrapped separately from the rest of the body.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 33 ft (10 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 38 ft (11.5 m).

Roof, hood, chrome delete and PPF on a Seven

A Seven chrome delete covers the window trim and badges with black film for a cleaner look. A partial wrap on this car can be the hood, the mirror caps, or the rear deck. Paint protection film (PPF) is a clear film applied to the front end to protect the nose and the lower areas.

  • Partial wrap: hood, mirror caps, rear deck.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Caterham Seven: body, cut-outs and film

A Caterham Seven vinyl wrap has to follow a very small and open two-door convertible body. The body is 133.1 in (3,380 mm) long, so there are no large flat panels that make layout easy. Wrapping this car means working around the open cockpit and the exposed wheels, which adds time but not much extra film.

Good Seven wrap ideas start with covering the main panels in one color or a printed design, but the body has areas that need care. The fabric top is not wrapped and the film ends exactly where it begins, so the edge must be cut cleanly. A folding hard top is wrapped as panels of its own, not as part of the main shell.

Because there is only one generation listed, the film amount does not change between years for someone counting material. The same 1992–now convertible body has been used, so how much vinyl to wrap a Seven stays about 33 ft (10 m) of 60-inch film. If you order chrome or patterned film, plan for about 38 ft (11.5 m) to allow for trimming.

Questions about wrapping a Caterham Seven

How much vinyl does it take to wrap a Caterham Seven?

It takes about 33 ft (10 m) of 60-inch (1.52 m) cast film to wrap a Caterham Seven. For chrome or patterned film, the needed amount rises to about 38 ft (11.5 m). The small convertible body uses less material than a larger car, but the open top means the film must be trimmed exactly at the edge.

Is the top of a Seven wrapped?

No, the top of a Seven is not wrapped. The standard fabric top is left uncovered, so the wrap ends where the top begins. Only a folding hard top is covered, and its panels are wrapped on their own.

Can I wrap only the hood or the roof of a Seven?

Yes, you can wrap only the hood or the roof of a Seven. A partial wrap can cover the hood, the mirror caps, or the rear deck. The roof itself is not wrapped unless you have a folding hard top, and then its panels are done separately.

Is a Seven hard to wrap?

Yes, a Seven is harder to wrap than many cars because of its small size and open body. The 133.1 in (3,380 mm) length means every panel is short, and the film must stop cleanly at the fabric top. A folding hard top adds separate panels that need their own careful trimming.