Wraps by car

Changan Benni wrap

The Changan Benni wrap guide covers both generations of this subcompact hatchback. A full vinyl wrap of the newest body takes about 46 ft (14 m) of 60-inch (1.52 m) cast film. With chrome or patterned film, expect to use about 54 ft (16.5 m).

2generations14 mof film for a full wrap

Changan Benni, second generation, factory photo
Changan Benni, second generation. Factory color shown.

Changan Benni wrap colors and ideas

  • Benni black wrap
  • Benni white wrap
  • Benni gray wrap
  • Benni silver wrap
  • Benni red wrap
  • Benni blue wrap
  • Benni green wrap
  • Benni yellow wrap
  • Benni orange wrap
  • Benni purple wrap
  • Benni pink wrap
  • Benni teal wrap
  • Benni brown wrap
  • Benni gold wrap
  • Benni chrome wrap
  • Benni color shift wrap
  • Benni carbon fiber wrap
  • Benni camo and patterned wrap

How much vinyl to wrap a Changan Benni

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2010–2014hatchback (5 doors)138.8 in (3,525 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m)
2006–2011hatchback (5 doors)138.8 in (3,525 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m)

Benni wrap cost factors

Benni wrap cost depends on the film type and the condition of the panels. The size of the car calls for about 46 ft (14 m) of standard cast film, while chrome or patterned film pushes the total to about 54 ft (16.5 m). Additional work on the tailgate glass edge can affect the final cost.

  • Film for a full wrap: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Benni wraps by generation

Swipe sideways. Tap a card for the full description.

Changan Benni, second generation, factory photo
Factory color shown

2010–2014 Benni hatchback (second generation)

2010–2014hatchback (5 doors)138.8 in (3,525 mm)

The second generation Changan Benni from 2010 to 2014 may have original or repainted panels. Paint age and condition vary on a car of these years, so a test spot before the full wrap is necessary. The wrap film needs a stable surface, and a test spot shows whether the existing paint will hold the adhesive.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).

Changan Benni, first generation, factory photo
Factory color shown

2006–2011 Benni hatchback (first generation)

2006–2011hatchback (5 doors)138.8 in (3,525 mm)

The first generation Changan Benni ran from 2006 to 2011 and overlaps with the second generation in 2010 and 2011. An owner of a car from those overlapping years checks which body style the car has before ordering film. Both bodies are five-door hatchbacks with the same length, but the tailgate design can differ.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).

Roof, hood, chrome delete and PPF on a Benni

A partial wrap on a Benni can cover the roof, hood, or mirror caps. Benni chrome delete is done by covering the window trim and badges with black film. For paint protection film, clear film is applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Changan Benni: body, cut-outs and film

The Changan Benni vinyl wrap job is sized by its single five-door hatchback style. Both generations share a length of 138.8 in (3,525 mm), so film needs do not change between them. The five doors mean you wrap four side doors plus the tailgate, and the small body keeps the total film area modest.

Benni wrap ideas must account for the tailgate with its rear glass set into the panel. The film ends at the edge of the glass on that tailgate, so the glass itself is not covered. Cut-outs are needed around the tailgate glass, and the badge area on the tailgate can be wrapped or removed depending on the finish you want.

To know how much vinyl to wrap a Benni, check which generation the car is. The first generation ran from 2006 to 2011, and the second generation from 2010 to 2014, with overlap in 2010 and 2011. Both generations use the same body measurements, so the film estimate stays the same regardless of generation.

Questions about wrapping a Changan Benni

How much vinyl does it take to wrap a Changan Benni?

About 46 ft (14 m) of 60-inch (1.52 m) cast film is needed to wrap a Changan Benni. With chrome or patterned film, the amount rises to about 54 ft (16.5 m). These figures come from the newest body, and both generations share the same dimensions.

Can I wrap only the hood or the roof of a Benni?

Yes, you can wrap only the hood or the roof of a Benni. A partial wrap can include the roof, hood, mirror caps, and a chrome delete for window trim and badges. Clear paint protection film on the front end is another option for smaller jobs.

Is a Benni hard to wrap?

The Benni is not hard to wrap, but the tailgate glass calls for extra care. The film ends at the edge of the glass on the tailgate, so you need a precise cut there. The small size of the car makes the job quicker than a larger vehicle.

How many generations of the Benni does this page cover?

This page covers two generations of the Changan Benni. The first generation is from 2006 to 2011, and the second is from 2010 to 2014. Both are described in the wrap guide with their shared body measurements.