Wraps by car

Citroen BX wrap

The Citroen BX wrap guide covers this mid-size hatchback and wagon, produced from 1982 to 1994 as a single generation. A vinyl wrap of the newest body takes about 49 ft (15 m) of 60-inch (1.52 m) cast film for the hatchback and 52 ft (16 m) for the wagon. Detailed installation notes and wrap planning numbers are provided for every body style.

1generations16 mof film for a full wrap

Citroen BX, first generation, factory photo
Citroen BX, first generation. Factory color shown.

Citroen BX wrap colors and ideas

  • Citroen BX black wrap
  • Citroen BX white wrap
  • Citroen BX gray wrap
  • Citroen BX silver wrap
  • Citroen BX red wrap
  • Citroen BX blue wrap
  • Citroen BX green wrap
  • Citroen BX yellow wrap
  • Citroen BX orange wrap
  • Citroen BX purple wrap
  • Citroen BX pink wrap
  • Citroen BX teal wrap
  • Citroen BX brown wrap
  • Citroen BX gold wrap
  • Citroen BX chrome wrap
  • Citroen BX color shift wrap
  • Citroen BX carbon fiber wrap
  • Citroen BX camo and patterned wrap

How much vinyl to wrap a Citroen BX

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1982–1994hatchback, wagon (5 doors)166.9 in (4,240 mm) to 173.2 in (4,400 mm)about 49 ft (15 m) for the hatchback to 52 ft (16 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 67 ft (20.5 m)

Citroen BX wrap cost factors

A Citroen BX wrap cost is driven by the body style, film type, and installation labor. The wagon uses about 52 ft (16 m) of 60-inch (1.52 m) film, compared to 49 ft (15 m) for the hatchback, so film cost is higher. Chrome or patterned vinyl can push the total film to around 67 ft (20.5 m), adding material expense. The tailgate with integrated glass also means more trimming time, which affects labor.

  • Film for a full wrap: about 49 ft (15 m) for the hatchback to 52 ft (16 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 67 ft (20.5 m).
  • Body: hatchback, wagon (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Citroen BX wraps by generation

Swipe sideways. Tap a card for the full description.

Citroen BX, first generation, factory photo
Factory color shown

1982–1994 Citroen BX hatchback, wagon (first generation)

1982–1994hatchback, wagon (5 doors)166.9 in (4,240 mm) to 173.2 in (4,400 mm)

The first generation Citroen BX (1982-1994) came as a hatchback and a wagon, and the style decides the panel plan and the film amount. The hatchback needs about 49 ft (15 m) of 60-inch (1.52 m) cast film, while the wagon needs 52 ft (16 m). Both are five-door bodies with similar front-end shapes, so the hood and fenders wrap the same way. The length difference from 166.9 in (4,240 mm) to 173.2 in (4,400 mm) is all in the rear section, which adds panels to the wagon.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 49 ft (15 m) for the hatchback to 52 ft (16 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 67 ft (20.5 m).

Roof, hood, chrome delete and PPF on a Citroen BX

A partial wrap on a Citroen BX can include the roof, hood, or mirror caps, and chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is applied as a clear film on the front end to guard against stone chips. These smaller jobs use less film than a full color change wrap. The tailgate design does not affect these partial areas except when wrapping the roof near the rear glass.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Citroen BX: body, cut-outs and film

The Citroen BX vinyl wrap amount depends on the body style, because the wagon is longer than the hatchback. The hatchback measures 166.9 in (4,240 mm) to 173.2 in (4,400 mm), while the wagon reaches the upper end of that range. Plan on about 49 ft (15 m) of 60-inch (1.52 m) film for the hatchback and 52 ft (16 m) for the wagon. The extra length of the wagon adds roughly 3 ft (1 m) of film to the job.

Citroen BX wrap ideas should account for the tailgate, which includes the rear glass in a single unit. The film ends at the edge of the glass, so the installer must trim carefully around that opening. The tailgate is the main area needing a cut-out on this car. Other parts like door handles and mirrors still require standard relief cuts.

How much vinyl to wrap a Citroen BX depends on whether you choose solid, chrome, or patterned film. The hatchback needs about 49 ft (15 m) of solid cast film, while chrome or patterned film can require up to 67 ft (20.5 m) for the wagon. The patterned film has a repeat that must be matched at panel edges, so extra material is needed. A one-generation model like the BX keeps the film estimate consistent across all production years.

Questions about wrapping a Citroen BX

How much vinyl does it take to wrap a Citroen BX?

A Citroen BX takes about 49 ft (15 m) of 60-inch (1.52 m) cast film for the hatchback and 52 ft (16 m) for the wagon. This estimate covers the full exterior of the newest body style. Chrome or patterned film can require up to 67 ft (20.5 m) because of pattern matching and extra trim coverage.

Which Citroen BX body takes more film?

The Citroen BX wagon takes more film than the hatchback, about 52 ft (16 m) compared to 49 ft (15 m) of 60-inch (1.52 m) cast film. The wagon is longer, measuring up to 173.2 in (4,400 mm), which adds about 3 ft (1 m) of film. This difference comes from the extra body panels behind the rear doors.

Can I wrap only the hood or the roof of a Citroen BX?

Yes, you can wrap only the hood or the roof of a Citroen BX, and other popular partial jobs include mirror caps, chrome delete on window trim and badges, and paint protection film on the front end. A hood wrap on the BX typically uses under 10 ft (3 m) of film because the hood is a smaller panel. The roof is also straightforward, but the tailgate with integrated glass is not involved in these partial wraps.

Is a Citroen BX hard to wrap?

A Citroen BX is moderately hard to wrap because the tailgate includes the rear glass, so the film must be trimmed exactly at the edge of the glass. The car's size, up to 173.2 in (4,400 mm) long, means more panel area to cover, especially on the wagon. The body has relatively flat surfaces, which helps, but the tailgate edge requires a steady hand for a clean cut-out.