Wraps by car

Citroen Dyane wrap

The Citroen Dyane wrap page covers the first generation built from 1967 to 1984. The catalog lists one generation of this classic subcompact hatchback. A full wrap of the newest body takes about 49 ft (15 m) of 60-inch (1.52 m) cast film. Chrome or patterned film needs about 57 ft (17.5 m) for the same body.

1generations15 mof film for a full wrap

Citroen Dyane, first generation, factory photo
Citroen Dyane, first generation. Factory color shown.

Citroen Dyane wrap colors and ideas

  • Dyane black wrap
  • Dyane white wrap
  • Dyane gray wrap
  • Dyane silver wrap
  • Dyane red wrap
  • Dyane blue wrap
  • Dyane green wrap
  • Dyane yellow wrap
  • Dyane orange wrap
  • Dyane purple wrap
  • Dyane pink wrap
  • Dyane teal wrap
  • Dyane brown wrap
  • Dyane gold wrap
  • Dyane chrome wrap
  • Dyane color shift wrap
  • Dyane carbon fiber wrap
  • Dyane camo and patterned wrap

How much vinyl to wrap a Citroen Dyane

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1967–1984hatchback (5 doors)153.5 in (3,899 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)

Dyane wrap cost factors

The Dyane wrap cost depends mainly on the film area and the condition of the 1967–1984 body. A full wrap uses about 49 ft (15 m) of cast film, or about 57 ft (17.5 m) for chrome or patterned film. The price of labor changes with how much trim you remove and how much repair the panels need. A car with original paint may need more preparation than one that was repainted recently.

  • Film for a full wrap: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Dyane wraps by generation

Swipe sideways. Tap a card for the full description.

Citroen Dyane, first generation, factory photo
Factory color shown

1967–1984 Dyane hatchback (first generation)

1967–1984hatchback (5 doors)153.5 in (3,899 mm)

The first generation Citroen Dyane was produced from 1967 to 1984 as a five-door hatchback. On a car of these years panels may be original or repainted, and a test spot comes before a full wrap. Check the paint condition on each panel before stretching film over it. A short test piece on a hidden area shows whether the film will bond well.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Roof, hood, chrome delete and PPF on a Dyane

A partial wrap on a Citroen Dyane can cover the roof, hood, or mirror caps without wrapping the whole car. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These smaller jobs use less film than a full color change wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Citroen Dyane: body, cut-outs and film

The Citroen Dyane vinyl wrap starts with a five-door hatchback body measuring 153.5 in (3,899 mm) in length. That compact size keeps the film area manageable for one installer. The tall, boxy sides and flat roof panels are straightforward to cover. The rear tailgate includes the glass, so the film ends at the edge of that glass.

Wrap ideas for the Dyane often focus on the tailgate where the rear glass sits in the panel. Cut the film cleanly around that glass because the wrap stops at its edge. The five-door layout also means four side doors with handles and mirrors to trim around. Remove badges and trim before wrapping for cleaner edges.

If you are working out how much vinyl to wrap a Dyane, the single 1967–1984 generation makes the math simple. You only need one film estimate for the whole run. The figure is about 49 ft (15 m) of 60-inch (1.52 m) cast film. Add roughly 8 ft (2.5 m) more if you use chrome or patterned film.

Questions about wrapping a Citroen Dyane

How much vinyl does it take to wrap a Citroen Dyane?

A full Citroen Dyane wrap takes about 49 ft (15 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, plan for about 57 ft (17.5 m). These estimates cover the first-generation five-door hatchback body.

Can I wrap only the hood or the roof of a Dyane?

Yes, you can wrap only the hood or the roof of a Dyane. A partial wrap on this car can include the roof, hood, or mirror caps. You can also do a chrome delete on the window trim and badges or add clear paint protection film to the front end.

Is a Dyane hard to wrap?

A Dyane wrap adds work because of the tailgate with the rear glass in it. The film must end at the edge of that glass, so you trim carefully around it. The car is a compact 153.5 in (3,899 mm) long, so the overall film area is not large. Still, the five-door body has many handles and trim pieces to remove or cut around.

How many generations of the Dyane does this page cover?

This page covers one generation of the Citroen Dyane. That generation was built from 1967 to 1984. The catalog lists only the first generation of this car.