Wraps by car

Citroen Xsara Picasso wrap

The Citroen Xsara Picasso wrap is a color change job on a compact minivan produced from 1999 through 2012. Only one generation of this model exists, sold as a five-door van with the internal code N68. A full wrap of the body takes about 62 ft (19 m) of 60-inch (1.52 m) cast film.

1generations19 mof film for a full wrap

Citroen Xsara Picasso, first generation, factory photo
Citroen Xsara Picasso, first generation. Factory color shown.

Citroen Xsara Picasso wrap colors and ideas

  • Xsara Picasso black wrap
  • Xsara Picasso white wrap
  • Xsara Picasso gray wrap
  • Xsara Picasso silver wrap
  • Xsara Picasso red wrap
  • Xsara Picasso blue wrap
  • Xsara Picasso green wrap
  • Xsara Picasso yellow wrap
  • Xsara Picasso orange wrap
  • Xsara Picasso purple wrap
  • Xsara Picasso pink wrap
  • Xsara Picasso teal wrap
  • Xsara Picasso brown wrap
  • Xsara Picasso gold wrap
  • Xsara Picasso chrome wrap
  • Xsara Picasso color shift wrap
  • Xsara Picasso carbon fiber wrap
  • Xsara Picasso camo and patterned wrap

How much vinyl to wrap a Citroen Xsara Picasso

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1999–2012van (5 doors)168.3 in (4,276 mm)about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m)

Xsara Picasso wrap cost factors

Xsara Picasso wrap cost depends on the area covered, the film type and the labor on the sliding doors and large panels. A full wrap uses about 62 ft (19 m) of 60-inch (1.52 m) cast film, while chrome or patterned film needs about 72 ft (22 m). The five-door body and high roof add cutting and repositioning time compared with a small hatchback.

  • Film for a full wrap: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.

Xsara Picasso wraps by generation

Swipe sideways. Tap a card for the full description.

Citroen Xsara Picasso, first generation, factory photo
Factory color shown

1999–2012 Xsara Picasso van (first generation)

1999–2012van (5 doors)168.3 in (4,276 mm)

The first-generation Citroen Xsara Picasso has sliding side doors that stay bare at the tracks and decide where the film is cut. Installers leave the track area unwrapped so the doors keep sliding freely. The cut line runs along the track edge, and the film is tucked behind the rubber seal where possible.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).

Roof, hood, chrome delete and PPF on a Xsara Picasso

A partial wrap on a Citroen Xsara Picasso can cover the roof, hood or mirror caps on their own. A chrome delete covers the window trim and badges with black film for a different look. Paint protection film (PPF) is a clear film applied to the front end to shield it from stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Citroen Xsara Picasso: body, cut-outs and film

A Citroen Xsara Picasso vinyl wrap covers a body that is 168.3 in (4,276 mm) long. The tall, boxy shape adds film area on the roof and tailgate compared with a lower hatchback. The sliding side doors mean the wrap has to be planned around the door tracks.

Xsara Picasso wrap ideas start with the sliding doors, because their tracks stay bare and the film is cut along them. The door handles, mirrors, roof rails and badges are removed or masked for a clean install. The large rear window and front glass need precise cut-outs when film is tucked at the edges.

How much vinyl to wrap a Xsara Picasso is the same for every production year, since the body was not changed. The single generation ran from 1999 to 2012 with the same exterior dimensions. Film estimates are based on the 168.3 in (4,276 mm) length of the van.

Questions about wrapping a Citroen Xsara Picasso

How much vinyl does it take to wrap a Citroen Xsara Picasso?

Yes, a Citroen Xsara Picasso takes about 62 ft (19 m) of 60-inch (1.52 m) cast film for a full wrap. The figure is based on the only body style, the five-door van produced from 1999 to 2012.

Are the sliding doors of a Xsara Picasso wrapped?

No, the sliding doors of a Xsara Picasso are wrapped only on the painted areas outside the tracks. The door tracks stay bare so the doors move without rubbing the film. The film is cut along the edge of each track.

Can I wrap only the hood or the roof of a Xsara Picasso?

Yes, you can wrap only the hood or the roof of a Xsara Picasso. A partial wrap may cover the roof, hood, or mirror caps, or you can do a chrome delete on the window trim and badges.

Is a Xsara Picasso hard to wrap?

A Xsara Picasso is not the easiest car to wrap because of the sliding side doors and their tracks. The film has to be cut along the tracks and the tall body means more reaching and repositioning. The length of 168.3 in (4,276 mm) adds work compared with a shorter car.