Wraps by car

Classic Roadster Cobra wrap

A Classic Roadster Cobra wrap covers every painted panel of this sports car with a color change vinyl wrap. The catalog shows one generation, built from 1989 to 2019, with a convertible body only. A full wrap of that body takes about 38 ft (11.5 m) of 60-inch (1.52 m) cast film.

1generations11.5 mof film for a full wrap

Classic Roadster Cobra, first generation, factory photo
Classic Roadster Cobra, first generation. Factory color shown.

Classic Roadster Cobra wrap colors and ideas

  • Cobra black wrap
  • Cobra white wrap
  • Cobra gray wrap
  • Cobra silver wrap
  • Cobra red wrap
  • Cobra blue wrap
  • Cobra green wrap
  • Cobra yellow wrap
  • Cobra orange wrap
  • Cobra purple wrap
  • Cobra pink wrap
  • Cobra teal wrap
  • Cobra brown wrap
  • Cobra gold wrap
  • Cobra chrome wrap
  • Cobra color shift wrap
  • Cobra carbon fiber wrap
  • Cobra camo and patterned wrap

How much vinyl to wrap a Classic Roadster Cobra

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1989–2019convertible (2 doors)162.0 in (4,115 mm)about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m)

Cobra wrap cost factors

Cobra wrap cost depends on the film area, the film type and the work on the panels of this car. The first generation body takes about 38 ft (11.5 m) of 60-inch (1.52 m) cast film for a full wrap. Chrome or patterned film needs about 49 ft (15 m) and adds more cutting time. The convertible body means the fabric top is not wrapped, which keeps the area down.

  • Film for a full wrap: about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m).
  • Body: convertible (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Cobra wraps by generation

Swipe sideways. Tap a card for the full description.

Classic Roadster Cobra, first generation, factory photo
Factory color shown

1989–2019 Cobra convertible (first generation)

1989–2019convertible (2 doors)162.0 in (4,115 mm)

The first generation Classic Roadster Cobra is a two-door convertible built from 1989 to 2019. In a wrap, the fabric top is not covered, and the film ends where the top begins. A folding hard top, if fitted, is wrapped as panels of its own.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m).

Roof, hood, chrome delete and PPF on a Cobra

A partial wrap on a Classic Roadster Cobra can cover the hood, mirror caps and rear deck. A Cobra chrome delete covers bright window trim and badges with black film. Paint protection film (PPF) is a clear film on the front end that keeps stone chips off the paint.

  • Partial wrap: hood, mirror caps, rear deck.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Classic Roadster Cobra: body, cut-outs and film

A Classic Roadster Cobra vinyl wrap has to follow the compact shape and the open top of this car. The body is a two-door convertible that measures 162.0 in (4,115 mm) long, which keeps the main panels short. The fabric top itself is not wrapped, so the film ends where the top begins. The rear deck behind the seats is part of the wrap, and it is one of the panels the installer plans film for.

Cobra wrap ideas start with the panels that need cut-outs or come off for clean edges. Door handles, side mirrors, lights and badges are removed or cut around so the film sits flat. The convertible body means the fabric top is not wrapped, and the film ends where it begins. A folding hard top, if fitted, is wrapped as panels of its own.

To know how much vinyl to wrap a Cobra, a person counting film checks the generation and the body style. The first generation ran from 1989 to 2019 and kept the same convertible shape. A full wrap of that body takes about 38 ft (11.5 m) of 60-inch (1.52 m) cast film. With chrome or patterned film, the figure is about 49 ft (15 m).

Questions about wrapping a Classic Roadster Cobra

How much vinyl does it take to wrap a Classic Roadster Cobra?

A Classic Roadster Cobra takes about 38 ft (11.5 m) of 60-inch (1.52 m) cast film for a full wrap. With chrome or patterned film, the figure is about 49 ft (15 m).

Is the top of a Cobra wrapped?

No, the fabric top of a Cobra is not wrapped. The film ends where the fabric top begins. A folding hard top, if fitted, is wrapped as panels of its own.

Can I wrap only the hood or the roof of a Cobra?

Yes, you can wrap only the hood, mirror caps or rear deck of a Cobra. A partial wrap can also cover just the hood or the mirror caps. Chrome delete covers window trim and badges with black film.

Is a Cobra hard to wrap?

A Cobra is a short car that takes extra work on some parts. Door handles, side mirrors, lights and badges are removed or cut around for clean edges. The fabric top is not wrapped, so the film ends where the top begins.