A Tavascan wrapped in brown is a complete color change over the factory paint on every body panel. Choose the finish first because matte, satin and gloss brown read differently on the tall sides of this SUV. Ordering enough film matters on the Tavascan because the tailgate includes the rear glass. The electric charge port door is wrapped as its own small piece for a clean edge.
The Cupra Tavascan has no factory paint in brown, so the wrap creates the color in one layer of film. Seams are planned where the film must end, such as the edge of the glass in the tailgate. Every trim has parking sensors in the bumpers and cameras in the body, so the film is cut around each sensor and lens. The installer lays the seams away from those cutouts to keep them clean.
A brown wrap on the Cupra Tavascan is removable when installed on sound factory paint. Hand wash the car with a soft mitt and pH-neutral soap because brushes can lift edges at seams and cutouts. Rinse the sensor and camera areas gently to avoid pushing water under the film. No abrasive polish is used on matte or satin finishes.