A Lodgy wrapped in white starts with the finish you want, because matte, satin and gloss read differently on the boxy body. Then you choose a film line from the counts on this page, since every film handles the door cut-outs in its own way. For a full color change, order about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film needs about 76 ft (23 m). A partial wrap in white covers only the roof, hood or mirror caps with far less film.

The factory paint under a white wrap matters because the color change hides it, but the condition of the clear coat still affects how flat the film sits. Seams are placed on body lines and panel edges, so the sliding door tracks of the Lodgy are left bare and the roof is cut along the rails. Every trim has roof rails, so the wrap shop either removes them or cuts the film neatly along each rail. Some trims also have parking sensors in the bumpers, which are cut around so they keep working.

A white wrap on the Lodgy is removable because cast film can be pulled off later, but the painted surfaces must be clean and intact first. Hand wash the van after the wrap, because a pressure washer aimed at a seam or sensor cut-out can lift the film edge. Keep a matte or satin white finish away from automatic car washes with brushes, since they can dull the film. The wrap does not lock you into one shade, so the paint underneath stays untouched for the next owner.