Wraps by car

Dallara Stradale wrap

The Dallara Stradale wrap page covers the one-generation sports car built from 2017 to today and the vinyl wrap a full body of its newest version takes. The convertible and coupe bodies both fit within this single generation. A full wrap uses 60-inch (1.52 m) cast vinyl and takes about 38 ft (11.5 m) for the convertible to 43 ft (13 m) for the coupe. Chrome or patterned film raises that to about 48 ft (14.5 m).

1generations11.5 mof film for a full wrap

Dallara Stradale, first generation, factory photo
Dallara Stradale, first generation. Factory color shown.

Dallara Stradale wrap colors and ideas

  • Stradale black wrap
  • Stradale white wrap
  • Stradale gray wrap
  • Stradale silver wrap
  • Stradale red wrap
  • Stradale blue wrap
  • Stradale green wrap
  • Stradale yellow wrap
  • Stradale orange wrap
  • Stradale purple wrap
  • Stradale pink wrap
  • Stradale teal wrap
  • Stradale brown wrap
  • Stradale gold wrap
  • Stradale chrome wrap
  • Stradale color shift wrap
  • Stradale carbon fiber wrap
  • Stradale camo and patterned wrap

How much vinyl to wrap a Dallara Stradale

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2017–nowconvertible, coupe164.8 in (4,185 mm)about 38 ft (11.5 m) for the convertible to 43 ft (13 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 48 ft (14.5 m)

Stradale wrap cost factors

Stradale wrap cost depends on the film type, the body style and the labor for the car's specific top. A full wrap of the convertible takes about 38 ft (11.5 m) of 60-inch (1.52 m) cast film, while the coupe takes about 43 ft (13 m). Material for chrome or patterned film runs up to about 48 ft (14.5 m). A folding hard top costs more to wrap than a fabric top, because it adds panels and cut edges.

  • Film for a full wrap: about 38 ft (11.5 m) for the convertible to 43 ft (13 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 48 ft (14.5 m).
  • Body: convertible, coupe.
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Stradale wraps by generation

Swipe sideways. Tap a card for the full description.

Dallara Stradale, first generation, factory photo
Factory color shown

2017–now Stradale convertible, coupe (first generation)

2017–nowconvertible, coupe164.8 in (4,185 mm)

The open top of the first-generation Dallara Stradale is the part installers plan around, because the body style decides what gets wrapped. A fabric top is not wrapped, and the film ends cleanly along the edge where the top meets the body. A folding hard top is wrapped as panels of its own, with the vinyl cut to each section separately. This is the only generation of the Stradale, so there is no earlier or later top design to compare.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 38 ft (11.5 m) for the convertible to 43 ft (13 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 48 ft (14.5 m).

Roof, hood, chrome delete and PPF on a Stradale

A partial wrap on the Stradale can be the roof, hood or mirror caps, and these jobs use less film than a full body. Chrome delete (bright trim covered with black film) works well on the window trim and badges of this sports car. Paint protection film (PPF) is a clear option for the front end and follows the same panel layout as a color change wrap. The convertible and coupe allow all of these smaller jobs.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Dallara Stradale: body, cut-outs and film

The Dallara Stradale vinyl wrap has to follow two body styles and a length of 164.8 in (4,185 mm). The convertible and coupe share the same overall size, so film quantities stay close for either style. The main difference is the top: a fabric panel is not wrapped, while a folding hard top adds separate wrapped panels. That means a coupe with a roof uses the longer end of the film estimate.

Stradale wrap ideas start with leaving the fabric top unwrapped and ending the film where it begins. The convertible body needs this clear boundary, so the installer plans the edge before cutting. A folding hard top is treated as its own set of small panels, which adds seams and a little more material. Badges and door handles require cut-outs, unless they are removed first.

How much vinyl to wrap a Stradale depends on which top the car has, because the generation spans 2017 to now. The base estimate is about 38 ft (11.5 m) for the convertible and 43 ft (13 m) for the coupe in 60-inch (1.52 m) film. If the job includes chrome or patterned vinyl, plan for up to about 48 ft (14.5 m). The body length does not change between body styles, so the top is the main variable.

Questions about wrapping a Dallara Stradale

How much vinyl does it take to wrap a Dallara Stradale?

A full wrap takes about 38 ft (11.5 m) for the convertible and 43 ft (13 m) for the coupe, using 60-inch (1.52 m) cast film. Chrome or patterned vinyl can raise the amount to about 48 ft (14.5 m). The Stradale has only one generation, so these figures cover the car from 2017 to now.

Is the top of a Stradale wrapped?

No, a fabric top is not wrapped, and the film ends where the top begins. A folding hard top is wrapped as panels of its own. The Dallara Stradale comes in both body styles, so the answer depends on the top fitted to the car.

Which Stradale body takes more film?

The coupe takes more film: about 43 ft (13 m), against about 38 ft (11.5 m) for the convertible. Both use 60-inch (1.52 m) cast film. The difference comes from the roof, which the convertible does not have unless it uses a folding hard top.

Can I wrap only the hood or the roof of a Stradale?

Yes, a partial wrap can cover only the hood or the roof of a Stradale. Mirror caps and other small panels are also possible. Chrome delete on window trim and badges, or clear paint protection film on the front end, are smaller jobs on the same body.