Wraps by car

Delage D6 wrap

The Delage D6 wrap page covers the single generation produced from 1930 to 1940 in coupe and sedan forms. A full vinyl wrap of the newest body takes about 51 ft (15.5 m) for the coupe to 59 ft (18 m) for the sedan using 60-inch (1.52 m) cast film.

1generations15.5 mof film for a full wrap

Delage D6, first generation, factory photo
Delage D6, first generation. Factory color shown.

Delage D6 wrap colors and ideas

  • Delage D6 black wrap
  • Delage D6 white wrap
  • Delage D6 gray wrap
  • Delage D6 silver wrap
  • Delage D6 red wrap
  • Delage D6 blue wrap
  • Delage D6 green wrap
  • Delage D6 yellow wrap
  • Delage D6 orange wrap
  • Delage D6 purple wrap
  • Delage D6 pink wrap
  • Delage D6 teal wrap
  • Delage D6 brown wrap
  • Delage D6 gold wrap
  • Delage D6 chrome wrap
  • Delage D6 color shift wrap
  • Delage D6 carbon fiber wrap
  • Delage D6 camo and patterned wrap

How much vinyl to wrap a Delage D6

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1930–1940coupe, sedan (2 or 4 doors)168.5 in (4,280 mm) to 194.9 in (4,950 mm)about 51 ft (15.5 m) for the coupe to 59 ft (18 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 69 ft (21 m)

Delage D6 wrap cost factors

Delage D6 wrap cost depends on the amount of film, the body style, and the extra work on the bright trim. The sedan needs about 59 ft (18 m) of film and more labor than the coupe at about 51 ft (15.5 m). A chrome delete or patterned film raises the film amount to about 69 ft (21 m). The number of cut-outs and removable parts also changes the final cost.

  • Film for a full wrap: about 51 ft (15.5 m) for the coupe to 59 ft (18 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 69 ft (21 m).
  • Body: coupe, sedan (2 or 4 doors).

Delage D6 wraps by generation

Swipe sideways. Tap a card for the full description.

Delage D6, first generation, factory photo
Factory color shown

1930–1940 Delage D6 coupe, sedan (first generation)

1930–1940coupe, sedan (2 or 4 doors)168.5 in (4,280 mm) to 194.9 in (4,950 mm)

The first generation Delage D6, built from 1930 to 1940, offers coupe and sedan body styles that decide the panel plan and the film amount. The coupe panel plan has shorter roof and rear sections, while the sedan has full four-door openings and a longer roof. This means the sedan takes about 59 ft (18 m) of film compared to about 51 ft (15.5 m) for the coupe. Both styles use 60-inch (1.52 m) cast film, and the chrome or patterned option raises the total to about 69 ft (21 m).

Film: about 51 ft (15.5 m) for the coupe to 59 ft (18 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 69 ft (21 m).

Roof, hood, chrome delete and PPF on a Delage D6

Partial wrap jobs on the Delage D6 cover the roof, hood, or mirror caps for a smaller change than a full color change wrap. A chrome delete (bright trim covered with black film) can be done on the window trim and badges. Paint protection film (PPF) with clear film on the front end protects the nose from stone chips. These smaller jobs let you keep the original paint while changing the look or adding protection.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Delage D6: body, cut-outs and film

A Delage D6 vinyl wrap must follow the contours of a luxury body that ranges from 168.5 in (4,280 mm) to 194.9 in (4,950 mm) long. Coupe panels are shorter and simpler than the long sedan roofline and four-door openings. The sedan demands more film and more time to set each panel without wrinkles or bridges. Installers measure each panel twice before cutting because the body varies between coachbuilt examples.

Delage D6 wrap ideas start with the parts that need cut-outs or come off for a clean install. Door handles, hinges, the radiator shell, and the side-mounted spare wheel all need careful trimming or removal before film goes on. The separate fenders and running boards are wrapped off the car where possible to keep edges hidden. The hood louvers and the exposed chrome trim make masking and knifeless tape the standard method on this car.

How much vinyl to wrap a Delage D6 depends on which body style you choose, since the generation never changed dimensions from 1930 to 1940. The coupe needs about 51 ft (15.5 m) of 60-inch (1.52 m) film, while the sedan needs about 59 ft (18 m). If you add chrome or patterned film the total can reach about 69 ft (21 m). There is only one generation in the catalog, so the film amount stays the same across all years.

Questions about wrapping a Delage D6

How much vinyl does it take to wrap a Delage D6?

It takes about 51 ft (15.5 m) for the coupe to 59 ft (18 m) for the sedan to wrap a Delage D6 with 60-inch (1.52 m) cast film. The estimate comes from the newest body in the catalog, which is the first generation from 1930 to 1940.

Which Delage D6 body takes more film?

The sedan takes more film than the coupe, with about 59 ft (18 m) needed for the sedan and about 51 ft (15.5 m) for the coupe. Both figures use 60-inch (1.52 m) cast film.

Can I wrap only the hood or the roof of a Delage D6?

Yes, you can wrap only the hood or the roof of a Delage D6 as a partial wrap. The job list includes the roof, hood, and mirror caps as smaller projects than a full wrap.

Is a Delage D6 hard to wrap?

The Delage D6 is not the easiest car to wrap because the separate fenders, running boards, and many chrome parts add work. The body length of 168.5 in (4,280 mm) to 194.9 in (4,950 mm) means long panels that need careful handling, and the cut-outs for hinges and the spare wheel demand extra time.