Wraps by car

DeLorean DMC-12 wrap

A DeLorean DMC-12 wrap can transform the stainless steel body with vinyl wrap in a single day. The catalog covers the first generation sports car from 1981–1982, the only generation produced. A full wrap of the coupe body takes about 44 ft (13.5 m) of 60-inch (1.52 m) cast film.

1generations13.5 mof film for a full wrap

DeLorean DMC-12, first generation, factory photo
DeLorean DMC-12, first generation. Factory color shown.

DeLorean DMC-12 wrap colors and ideas

  • DeLorean DMC-12 black wrap
  • DeLorean DMC-12 white wrap
  • DeLorean DMC-12 gray wrap
  • DeLorean DMC-12 silver wrap
  • DeLorean DMC-12 red wrap
  • DeLorean DMC-12 blue wrap
  • DeLorean DMC-12 green wrap
  • DeLorean DMC-12 yellow wrap
  • DeLorean DMC-12 orange wrap
  • DeLorean DMC-12 purple wrap
  • DeLorean DMC-12 pink wrap
  • DeLorean DMC-12 teal wrap
  • DeLorean DMC-12 brown wrap
  • DeLorean DMC-12 gold wrap
  • DeLorean DMC-12 chrome wrap
  • DeLorean DMC-12 color shift wrap
  • DeLorean DMC-12 carbon fiber wrap
  • DeLorean DMC-12 camo and patterned wrap

How much vinyl to wrap a DeLorean DMC-12

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1981–1982coupe (2 doors)168.0 in (4,267 mm)about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m)

DeLorean DMC-12 wrap cost factors

DeLorean DMC-12 wrap cost depends on the film type and the labor involved with the panels. The car is 168.0 in (4,267 mm) long, which is a small sports car, but the long doors add time for one-piece application. Paint protection film costs differently from color change wrap because it is applied to specific areas like the front end. The condition of the original panels, which may be original or repainted, also affects preparation work.

  • Film for a full wrap: about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

DeLorean DMC-12 wraps by generation

Swipe sideways. Tap a card for the full description.

DeLorean DMC-12, first generation, factory photo
Factory color shown

1981–1982 DeLorean DMC-12 coupe (first generation)

1981–1982coupe (2 doors)168.0 in (4,267 mm)

The first generation DeLorean DMC-12 was produced from 1981–1982 as a coupe with two doors. Paint age matters on a car of these years because panels may be original or repainted. A test spot on the stainless steel comes before a full wrap to check adhesion. The brushed finish does not need paint correction, but the surface must be cleaned thoroughly.

Two long side doors: each door is one large piece of film.

Film: about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).

Roof, hood, chrome delete and PPF on a DeLorean DMC-12

A partial wrap on a DeLorean DMC-12 can cover the roof, hood, or mirror caps. Chrome delete, which is bright trim covered with black film, is often done on the window trim and badges. Paint protection film (PPF) is a clear film that protects the front end from stone chips. These smaller jobs use less film than a full wrap and can be completed in less time.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a DeLorean DMC-12: body, cut-outs and film

The DeLorean DMC-12 vinyl wrap starts with a compact coupe body that is 168.0 in (4,267 mm) long. Two long side doors are the largest single panels on the car. Each door is one large piece of film, so careful alignment and stretching are needed. The 60-inch (1.52 m) film width fits the door height without seams.

DeLorean DMC-12 wrap ideas often include covering the brushed stainless panels for a different look. The long side doors can be wrapped as one piece each, which means the film must be laid without wrinkles. Cut-outs are needed around the door handles and the small side windows. The car has no conventional B-pillar, so the door edges are exposed and require precise trimming.

How much vinyl to wrap a DeLorean DMC-12 depends on the film you choose and the condition of the body. A full color change wrap uses about 44 ft (13.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film needs about 54 ft (16.5 m) because it must be matched at the seams. The first generation car is a single body style, so the estimate does not change between years.

Questions about wrapping a DeLorean DMC-12

How much vinyl does it take to wrap a DeLorean DMC-12?

A DeLorean DMC-12 full wrap takes about 44 ft (13.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film needs about 54 ft (16.5 m) to allow pattern matching. The figure is for the coupe body produced from 1981–1982.

Can I wrap only the hood or the roof of a DeLorean DMC-12?

Yes, you can wrap only the hood or the roof of a DeLorean DMC-12. Partial wrap jobs on this car include the roof, hood, and mirror caps. Chrome delete covers window trim and badges, and paint protection film can be applied to the front end.

Is a DeLorean DMC-12 hard to wrap?

A DeLorean DMC-12 is not hard to wrap if you plan for the two long side doors. Each door is one large piece of film, so installation requires patience and a second pair of hands. The car is compact at 168.0 in (4,267 mm), which simplifies working around the vehicle.

How many generations of the DeLorean DMC-12 does this page cover?

This page covers one generation of the DeLorean DMC-12, the first generation from 1981–1982. The DMC-12 was produced only as a coupe with two doors. It is the only generation in the catalog.