Wraps by car

Denza B3 wrap

This page covers the Denza B3 wrap in one generation, the SUV sold from 2025 to now. A full vinyl wrap of this body takes about 62 ft (19 m) of 60-inch (1.52 m) cast film. Add extra film for chrome or patterned vinyl, with about 72 ft (22 m) for those designs.

1generations19 mof film for a full wrap

Denza B3, first generation, factory photo
Denza B3, first generation. Factory color shown.

Denza B3 wrap colors and ideas

  • Denza B3 black wrap
  • Denza B3 white wrap
  • Denza B3 gray wrap
  • Denza B3 silver wrap
  • Denza B3 red wrap
  • Denza B3 blue wrap
  • Denza B3 green wrap
  • Denza B3 yellow wrap
  • Denza B3 orange wrap
  • Denza B3 purple wrap
  • Denza B3 pink wrap
  • Denza B3 teal wrap
  • Denza B3 brown wrap
  • Denza B3 gold wrap
  • Denza B3 chrome wrap
  • Denza B3 color shift wrap
  • Denza B3 carbon fiber wrap
  • Denza B3 camo and patterned wrap

How much vinyl to wrap a Denza B3

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2025–nowSUV181.3 in (4,605 mm)about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m)

Denza B3 wrap cost factors

Denza B3 wrap cost depends on the film type and the amount of labor for this 181.3 in (4,605 mm) SUV. A full wrap takes about 62 ft (19 m) of 60-inch (1.52 m) film, while chrome or patterned film adds about 10 ft (3 m) more. The tailgate glass edge and the charge port door add small cut-and-fit steps that affect the work time.

  • Film for a full wrap: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).
  • Body: SUV.
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Electric car: the charge port door is wrapped as a small piece of its own.

Denza B3 wraps by generation

Swipe sideways. Tap a card for the full description.

Denza B3, first generation, factory photo
Factory color shown

2025–now Denza B3 SUV (first generation)

2025–nowSUV181.3 in (4,605 mm)

The first generation Denza B3 is an SUV with a length of 181.3 in (4,605 mm) and a body style that sets the film amount. A full wrap uses about 62 ft (19 m) of 60-inch (1.52 m) cast film, with more for chrome or patterned options. Its upright panels are straightforward, and the tailgate plus charge port door make up the extra pieces.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).

Roof, hood, chrome delete and PPF on a Denza B3

A partial wrap on a Denza B3 can cover the roof, hood, and mirror caps instead of the whole body. A chrome delete turns the window trim and badges black with film. Paint protection film (PPF) is another smaller job, putting clear film on the front end.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Denza B3: body, cut-outs and film

The Denza B3 vinyl wrap starts with a body that is 181.3 in (4,605 mm) long, a size typical for a modern SUV. The single body style means the film estimate works for every B3 you will see. The tailgate and charge port door are wrapped as separate pieces, so the panel count stays the same.

Denza B3 wrap ideas follow from two details on the body. The tailgate has the rear glass in it, so the film ends at the edge of the glass. The charge port door on this electric car is wrapped as a small piece of its own.

How much vinyl to wrap a Denza B3 is the same for this one generation sold from 2025 to now. There are no older bodies to compare, so the film estimate does not change between production years. The SUV length of 181.3 in (4,605 mm) stays constant, and the set of panels is identical.

Questions about wrapping a Denza B3

How much vinyl does it take to wrap a Denza B3?

It takes about 62 ft (19 m) of 60-inch (1.52 m) cast film to wrap a Denza B3. For chrome or patterned film, the amount rises to about 72 ft (22 m). This estimate is based on the first generation SUV sold from 2025 to now.

Can I wrap only the hood or the roof of a Denza B3?

Yes, you can wrap only the hood or the roof of a Denza B3. Partial wrap jobs on this car often cover the roof, hood, and mirror caps. A chrome delete or clear paint protection film on the front end are other options that do not require a full wrap.

Is a Denza B3 hard to wrap?

A Denza B3 is not especially hard to wrap, but it has two parts that add work. The tailgate has the rear glass in it, so the film must be cut to end at the edge of the glass. The charge port door on this electric car is wrapped as a separate small piece, adding one more panel to handle.

How many generations of the Denza B3 does this page cover?

This page covers one generation of the Denza B3, sold from 2025 to now. That first generation is an SUV with a length of 181.3 in (4,605 mm). No other generations are in the catalog, so all wrap estimates are for that body.