Wraps by car

DeSoto Custom wrap

The DeSoto Custom wrap page covers the second generation car built from 1949 to 1952. A full wrap of the newest Custom body takes about 62 ft (19 m) to 70 ft (21.5 m) of 60-inch (1.52 m) cast vinyl wrap. The length depends on the body style, from the convertible to the wagon.

1generations19 mof film for a full wrap

DeSoto Custom, second generation, factory photo
DeSoto Custom, second generation. Factory color shown.

DeSoto Custom wrap colors and ideas

  • Custom black wrap
  • Custom white wrap
  • Custom gray wrap
  • Custom silver wrap
  • Custom red wrap
  • Custom blue wrap
  • Custom green wrap
  • Custom yellow wrap
  • Custom orange wrap
  • Custom purple wrap
  • Custom pink wrap
  • Custom teal wrap
  • Custom brown wrap
  • Custom gold wrap
  • Custom chrome wrap
  • Custom color shift wrap
  • Custom carbon fiber wrap
  • Custom camo and patterned wrap

How much vinyl to wrap a DeSoto Custom

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1949–1952convertible, coupe, sedan, wagon (3 or 4 or 5 doors)206.8 in (5,253 mm)about 62 ft (19 m) for the convertible to 70 ft (21.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 80 ft (24.5 m)

Custom wrap cost factors

Custom wrap cost is set by the body style, the film choice, and the labor to prepare the 206.8 in (5,253 mm) body. A wagon needs about 70 ft (21.5 m) of cast film, while a convertible needs about 62 ft (19 m). The tailgate glass cut-out adds time on a wagon, and a folding hard top on a convertible adds panel work. The shop measures the car before quoting the job.

  • Film for a full wrap: about 62 ft (19 m) for the convertible to 70 ft (21.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 80 ft (24.5 m).
  • Body: convertible, coupe, sedan, wagon (3 or 4 or 5 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Custom wraps by generation

Swipe sideways. Tap a card for the full description.

DeSoto Custom, second generation, factory photo
Factory color shown

1949–1952 Custom convertible, coupe, sedan, wagon (second generation)

1949–1952convertible, coupe, sedan, wagon (3 or 4 or 5 doors)206.8 in (5,253 mm)

On the second generation DeSoto Custom, an open top means the fabric roof is not wrapped. The vinyl film ends at the edge where the fabric top begins, leaving the top untouched. If the car has a folding hard top, that top is wrapped as its own set of panels. The body below the beltline is wrapped normally.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 62 ft (19 m) for the convertible to 70 ft (21.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 80 ft (24.5 m).

Roof, hood, chrome delete and PPF on a Custom

A partial wrap on a DeSoto Custom can cover the roof, hood, or mirror caps. Custom chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end. These smaller jobs use much less film than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a DeSoto Custom: body, cut-outs and film

The DeSoto Custom vinyl wrap must fit a range of body styles from a two-door convertible to a five-door wagon. The car measures 206.8 in (5,253 mm) long, which sets the basic size for the film. Wrapping the wagon means covering the extra rear body panels and the tailgate. This body variety means one roll does not fit every Custom.

Custom wrap ideas for the DeSoto Custom start with the simple lines of a 1949–1952 body. The tailgate with rear glass needs the film trimmed to end at the edge of the glass. A convertible body has a fabric top that is not wrapped, so the film stops where the top begins. A folding hard top is wrapped as separate panels.

How much vinyl to wrap a Custom depends on the body style in the 1949–1952 generation. The convertible needs about 62 ft (19 m) of 60-inch (1.52 m) film. The wagon needs about 70 ft (21.5 m) for its taller roof and longer rear. Chrome or patterned film can push the total up to about 80 ft (24.5 m).

Questions about wrapping a DeSoto Custom

How much vinyl does it take to wrap a DeSoto Custom?

It takes about 62 ft (19 m) to 70 ft (21.5 m) of 60-inch (1.52 m) cast vinyl to wrap a DeSoto Custom. The lower figure is for the convertible and the higher figure is for the wagon. This covers the exterior painted body panels only.

Is the top of a Custom wrapped?

No, the top of a Custom is not wrapped when it is a fabric convertible top. The film ends at the edge where the fabric begins. A folding hard top is wrapped as separate panels.

Which Custom body takes more film?

The Custom wagon takes more film than the convertible. The wagon needs about 70 ft (21.5 m) of 60-inch (1.52 m) cast film. The convertible needs about 62 ft (19 m) for the same film.

Can I wrap only the hood or the roof of a Custom?

Yes, you can wrap only the hood or the roof of a Custom. The shop offers partial wraps for the roof, hood, and mirror caps. A partial wrap uses less film than a full wrap.