Wraps by car

DS 3 Crossback wrap

A DS 3 Crossback wrap uses a full roll of vinyl wrap on a compact five-door SUV body. The first generation, produced from 2018 onward, is the only one in the catalog. A complete color change takes about 46 ft (14 m) of 60-inch (1.52 m) cast film. Chrome or patterned film adds roughly 8 ft (2.5 m) to that estimate.

1generations14 mof film for a full wrap

DS 3 Crossback, first generation, factory photo
DS 3 Crossback, first generation. Factory color shown.

DS 3 Crossback wrap colors and ideas

  • DS 3 Crossback black wrap
  • DS 3 Crossback white wrap
  • DS 3 Crossback gray wrap
  • DS 3 Crossback silver wrap
  • DS 3 Crossback red wrap
  • DS 3 Crossback blue wrap
  • DS 3 Crossback green wrap
  • DS 3 Crossback yellow wrap
  • DS 3 Crossback orange wrap
  • DS 3 Crossback purple wrap
  • DS 3 Crossback pink wrap
  • DS 3 Crossback teal wrap
  • DS 3 Crossback brown wrap
  • DS 3 Crossback gold wrap
  • DS 3 Crossback chrome wrap
  • DS 3 Crossback color shift wrap
  • DS 3 Crossback carbon fiber wrap
  • DS 3 Crossback camo and patterned wrap

How much vinyl to wrap a DS 3 Crossback

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2018–nowSUV (5 doors)162.1 in (4,118 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m)

DS 3 Crossback wrap cost factors

DS 3 Crossback wrap cost depends on the amount of film, the number of cut-outs, and the condition of the panels. The full body needs about 46 ft (14 m) of 60-inch (1.52 m) film, and chrome or patterned film pushes the total to about 54 ft (16.5 m). Every trim has parking sensors, cameras, and a charge port on electric versions that add cutting time. A two-tone wrap that keeps the factory roof split also takes more planning.

  • Film for a full wrap: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Every trim has a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.
  • Every trim has a two-tone body from the factory: the roof is a second color, and the wrap either keeps that split or covers it.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.

DS 3 Crossback wraps by generation

Swipe sideways. Tap a card for the full description.

DS 3 Crossback, first generation, factory photo
Factory color shown

2018–now DS 3 Crossback SUV (first generation)

2018–nowSUV (5 doors)162.1 in (4,118 mm)

The first-generation DS 3 Crossback has a panoramic glass roof on every trim. The roof itself is not wrapped, and the film ends at the roof rails. That means the roof stays dark regardless of the wrap color chosen for the body.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Every trim has a two-tone body from the factory: the roof is a second color, and the wrap either keeps that split or covers it.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).

Roof, hood, chrome delete and PPF on a DS 3 Crossback

A partial wrap on a DS 3 Crossback can cover the hood, mirror caps, and tailgate as separate pieces. Chrome delete changes the bright window trim and badges to black film. Paint protection film (PPF) is a clear film applied to the front end. These jobs use less material than a full wrap.

  • Partial wrap: hood, mirror caps, tailgate.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a DS 3 Crossback: body, cut-outs and film

A DS 3 Crossback vinyl wrap covers a body that is 162.1 in (4,118 mm) long with five doors. The two-tone factory paint means the roof and body panels can be planned as separate color areas. A full wrap follows the SUV shape closely, with the tailgate and rear glass as one flat section. The compact size keeps the job straightforward without wasting film.

DS 3 Crossback wrap ideas start with the parts that need careful cut-outs. Every trim has parking sensors in the bumpers, so the film is cut around each sensor. Cameras in the body also need the film trimmed around each lens. The charge port door on plug-in and electric versions is wrapped as its own small piece. The panoramic glass roof is never wrapped, so the film ends at the roof rails.

How much vinyl to wrap a DS 3 Crossback does not change between generations, because there is only one generation from 2018 onward. The body length stays at 162.1 in (4,118 mm) across all trims. Every DS 3 Crossback has the same five-door SUV shape and glass roof. The film estimate of about 46 ft (14 m) of 60-inch (1.52 m) cast film applies to the entire production run.

Questions about wrapping a DS 3 Crossback

How much vinyl does it take to wrap a DS 3 Crossback?

A DS 3 Crossback takes about 46 ft (14 m) of 60-inch (1.52 m) cast film for a full wrap. If the wrap uses chrome or patterned film, the estimate rises to about 54 ft (16.5 m). These figures cover the entire first-generation body, which is the only generation in production.

Can the roof of a DS 3 Crossback be wrapped?

The roof of a DS 3 Crossback can be wrapped, but the panoramic glass panel itself is left uncovered. Film can be applied to the roof rails and the surrounding body color, ending at the edge of the glass. Every trim has the glass roof, so the plan is the same on all cars.

Can I wrap only the hood or the roof of a DS 3 Crossback?

Yes, a partial wrap on a DS 3 Crossback can cover only the hood or the roof. The hood is one of the panels offered as part of a partial wrap, along with the mirror caps and tailgate. The roof can be wrapped as a separate color area if the glass panel is left clear.

Is a DS 3 Crossback hard to wrap?

A DS 3 Crossback is not hard to wrap, but the details add time. Every trim has parking sensors in the bumpers and cameras in the body that need careful cut-outs. The charge port door on plug-in and electric versions is a separate small piece. The compact size of 162.1 in (4,118 mm) keeps the basic layout simple.