A Sterra ES wrapped in pink starts with the finish, because matte, satin, and gloss read differently on the sedan's long side panels. Matte film flattens the reflections and gives the body a soft, non-shiny look, while satin sits between matte and gloss with a gentle sheen. Gloss film reflects like fresh paint and makes the pink appear deeper. The color change wrap covers every painted panel, including the charge port door as its own piece.
Factory paint on the Sterra ES stays hidden under the pink wrap, because the film is applied over the original clear coat without sanding or stripping. Every panel edge and seam is wrapped to the back side so the original color does not show when a door or hood is open. The installer trims the film along body lines and tucks it into gaps for clean edges. The charge port door is wrapped separately to keep the film from bridging the gap when open.
A pink wrap on the Sterra ES is removable, so the factory finish can be restored by a professional using heat and the right removal technique. Hand wash the wrapped car with a pH-neutral soap and a soft mitt, because automatic brushes can lift film edges. Rinse with low pressure and dry with a microfiber towel to avoid water spots. Do not use solvent-based cleaners on the film.