Wraps by car

Exlantix ES wrap

The Exlantix ES wrap page covers the first-generation sedan built from 2025 onward. This page describes a full vinyl wrap, which takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film. A wrap with chrome or patterned film uses about 74 ft (22.5 m). The Exlantix ES is an electric car with one generation in the catalog.

1generations18.5 mof film for a full wrap

Exlantix ES, first generation, factory photo
Exlantix ES, first generation. Factory color shown.

Exlantix ES wrap colors and ideas

  • Exlantix ES black wrap
  • Exlantix ES white wrap
  • Exlantix ES gray wrap
  • Exlantix ES silver wrap
  • Exlantix ES red wrap
  • Exlantix ES blue wrap
  • Exlantix ES green wrap
  • Exlantix ES yellow wrap
  • Exlantix ES orange wrap
  • Exlantix ES purple wrap
  • Exlantix ES pink wrap
  • Exlantix ES teal wrap
  • Exlantix ES brown wrap
  • Exlantix ES gold wrap
  • Exlantix ES chrome wrap
  • Exlantix ES color shift wrap
  • Exlantix ES carbon fiber wrap
  • Exlantix ES camo and patterned wrap

How much vinyl to wrap an Exlantix ES

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2025–nowsedan (4 doors)194.7 in (4,945 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m)

Exlantix ES wrap cost factors

Exlantix ES wrap cost depends on the size of the car and the film chosen. The body is 194.7 in (4,945 mm) long, and a full wrap uses about 61 ft (18.5 m) of film. Labor increases with the number of panels and cutouts, like the charge port door. The final cost rises if you add paint protection film on the front or a chrome delete.

  • Film for a full wrap: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).
  • Body: sedan (4 doors).
  • Electric car: the charge port door is wrapped as a small piece of its own.

Exlantix ES wraps by generation

Swipe sideways. Tap a card for the full description.

Exlantix ES, first generation, factory photo
Factory color shown

2025–now Exlantix ES sedan (first generation)

2025–nowsedan (4 doors)194.7 in (4,945 mm)

The first-generation Exlantix ES is a four-door sedan that requires a full set of panels. It measures 194.7 in (4,945 mm) long, which means the hood, roof, trunk, and each door are wrapped separately. The charge port door is wrapped as its own small piece so the port still opens. Every trim of this generation shares the same body shape and length.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).

Roof, hood, chrome delete and PPF on an Exlantix ES

A partial wrap on an Exlantix ES can cover the roof, hood, or mirror caps only. An Exlantix ES chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips. These smaller jobs use less film than a full wrap and leave most of the factory color visible.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an Exlantix ES: body, cut-outs and film

An Exlantix ES vinyl wrap covers a large four-door sedan body. The car measures 194.7 in (4,945 mm) long, so the installer handles long side panels and a big roof. Its four doors and full front and rear fascias make up the main wrapped surfaces. The sedan shape has a trunk lid, hood, and roof as separate large panels.

Exlantix ES wrap ideas include wrapping the charge port door as its own small piece. That door sits in the body, and the wrap continues around it so the port can open. Installers also work around door handles, mirrors, lights, and the grille area. Trim around the windows can be wrapped separately for a chrome delete.

How much vinyl to wrap an Exlantix ES depends on the film type and design. The car is 194.7 in (4,945 mm) long, and a full color change uses about 61 ft (18.5 m) of 60-inch (1.52 m) film. Chrome or patterned film adds about 13 ft (4 m) because the installer must match patterns. The single generation means film amounts stay the same for all years.

More Exlantix wraps

Questions about wrapping an Exlantix ES

How much vinyl does it take to wrap an Exlantix ES?

A full wrap on an Exlantix ES takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film. That amount covers the sedan body with no chrome or pattern matching. If the wrap includes chrome or patterned film, the estimate rises to about 74 ft (22.5 m).

Can I wrap only the hood or the roof of an Exlantix ES?

Yes, you can wrap only the hood or the roof of an Exlantix ES. A partial wrap often covers one of those panels, the mirror caps, or a combination. A chrome delete on the window trim and badges is another small job. Paint protection film on the front end is also done without wrapping the whole car.

Is an Exlantix ES hard to wrap?

An Exlantix ES is not especially hard to wrap, but it has one extra step. The charge port door is wrapped as a small piece of its own, so the installer must cut and fit around it. The car is 194.7 in (4,945 mm) long, which adds time to handle the long side panels and roof. Its four doors and large fascias need careful trimming.

How many generations of the Exlantix ES does this page cover?

The Exlantix ES has one generation on this page. That generation is the first one, produced from 2025 onward. The film amounts and panel count refer to that single body style.