Wraps by car

Farizon Super Van wrap

The Farizon Super Van wrap page covers the first generation of this electric minivan, produced from 2025 to now. A full wrap of the newest body takes about 79 ft (24 m) of 60-inch (1.52 m) cast vinyl wrap. The page explains the body details that shape the installation and the jobs smaller than a full wrap.

1generations24 mof film for a full wrap

Farizon Super Van, first generation, factory photo
Farizon Super Van, first generation. Factory color shown.

Farizon Super Van wrap colors and ideas

  • Super Van black wrap
  • Super Van white wrap
  • Super Van gray wrap
  • Super Van silver wrap
  • Super Van red wrap
  • Super Van blue wrap
  • Super Van green wrap
  • Super Van yellow wrap
  • Super Van orange wrap
  • Super Van purple wrap
  • Super Van pink wrap
  • Super Van teal wrap
  • Super Van brown wrap
  • Super Van gold wrap
  • Super Van chrome wrap
  • Super Van color shift wrap
  • Super Van carbon fiber wrap
  • Super Van camo and patterned wrap

How much vinyl to wrap a Farizon Super Van

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2025–nowvan (4 or 5 doors)196.5 in (4,990 mm) to 236.0 in (5,995 mm)about 79 ft (24 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 95 ft (29 m)

Super Van wrap cost factors

Super Van wrap cost depends on the body length, the film finish and the cut-outs. A longer 236.0 in (5,995 mm) van uses more film than the 196.5 in (4,990 mm) body. Chrome or patterned film needs about 95 ft (29 m) against 79 ft (24 m) for solid cast film. The sensors, cameras and charge port add cut-outs that take more time.

  • Film for a full wrap: about 79 ft (24 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 95 ft (29 m).
  • Body: van (4 or 5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.
  • Electric car: the charge port door is wrapped as a small piece of its own.
  • A tall body (98.4 in (2,500 mm)): the roof is wrapped from a platform.

Super Van wraps by generation

Swipe sideways. Tap a card for the full description.

Farizon Super Van, first generation, factory photo
Factory color shown

2025–now Super Van van (first generation)

2025–nowvan (4 or 5 doors)196.5 in (4,990 mm) to 236.0 in (5,995 mm)

The first generation of the Super Van, built from 2025 to now, has sliding side doors that guide the wrap. The door tracks stay bare and decide where the film is cut along each door. This generation comes as a four or five door van in two lengths. The tall 98.4 in (2,500 mm) body means the roof is wrapped from a platform.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Electric car: the charge port door is wrapped as a small piece of its own.

A tall body (98.4 in (2,500 mm)): the roof is wrapped from a platform.

Film: about 79 ft (24 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 95 ft (29 m).

Roof, hood, chrome delete and PPF on a Super Van

Partial wrap on a Super Van covers the roof, the hood or the mirror caps. Super Van chrome delete covers the window trim and the badges with black film. Paint protection film is a clear option on the front end of a Super Van. These jobs are smaller than a full wrap and use less film.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Farizon Super Van: body, cut-outs and film

The Farizon Super Van vinyl wrap is shaped by two body lengths and one tall roof. The van is 196.5 in (4,990 mm) to 236.0 in (5,995 mm) long and 98.4 in (2,500 mm) tall, so the roof is wrapped from a platform. The sliding side doors leave the tracks bare and set where the film is cut. With four or five doors, every panel is a separate piece of film.

Super Van wrap ideas must work around the sensors, cameras, lamps and the charge port. Parking sensors in the bumpers are cut out of the film on every trim, as are the body cameras and the fog lamps. The charge port door is wrapped as a small piece of its own, separate from the quarter panel. The sliding door tracks stay bare, so the film is trimmed along them.

How much vinyl to wrap a Super Van depends on the body length and the film finish. The film estimate is about 79 ft (24 m) of 60-inch (1.52 m) cast film for the standard body. Chrome or patterned film takes about 95 ft (29 m) because the pattern must be matched across panels. Between generations there is only one body, so the figure holds for 2025 and newer vans.

Questions about wrapping a Farizon Super Van

How much vinyl does it take to wrap a Farizon Super Van?

A Farizon Super Van takes about 79 ft (24 m) of 60-inch (1.52 m) vinyl for a full wrap. That figure comes from the film estimate for the newest body of this electric minivan. Chrome or patterned film takes about 95 ft (29 m).

Are the sliding doors of a Super Van wrapped?

Yes, the sliding doors of a Super Van are wrapped, but the tracks stay bare. The film is cut along the door tracks, so the door panel is wrapped around them. This is a standard detail on the first generation.

Can I wrap only the hood or the roof of a Super Van?

Yes, you can wrap only the hood or the roof of a Super Van. Partial wrap on this van covers the roof, the hood or the mirror caps. The roof is tall, so a platform is needed for the install.

Is a Super Van hard to wrap?

A Super Van is harder to wrap than a small car because of its size and details. The body is up to 236.0 in (5,995 mm) long and 98.4 in (2,500 mm) tall, so a platform is needed. Sensors, cameras, fog lamps and the charge port all need cut-outs. The sliding door tracks must stay bare, which adds trimming work.