Wraps by car

Fisker Ocean wrap

The Fisker Ocean wrap page covers the first generation of this electric SUV, produced from 2021 to now. A full vinyl wrap of the newest body takes about 66 ft (20 m) of 60-inch (1.52 m) cast film. Chrome or patterned film adds roughly 8 ft (2.5 m) more, for a total around 74 ft (22.5 m).

1generations20 mof film for a full wrap

Fisker Ocean, first generation, factory photo
Fisker Ocean, first generation. Factory color shown.

Fisker Ocean wrap colors and ideas

  • Ocean black wrap
  • Ocean white wrap
  • Ocean gray wrap
  • Ocean silver wrap
  • Ocean red wrap
  • Ocean blue wrap
  • Ocean green wrap
  • Ocean yellow wrap
  • Ocean orange wrap
  • Ocean purple wrap
  • Ocean pink wrap
  • Ocean teal wrap
  • Ocean brown wrap
  • Ocean gold wrap
  • Ocean chrome wrap
  • Ocean color shift wrap
  • Ocean carbon fiber wrap
  • Ocean camo and patterned wrap

How much vinyl to wrap a Fisker Ocean

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2021–nowSUV (5 doors)188.0 in (4,775 mm)about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m)

Ocean wrap cost factors

Ocean wrap cost depends mainly on the size of the vehicle, the film chosen, and the amount of disassembly. A full wrap of this SUV needs about 66 ft (20 m) of 60-inch cast vinyl, or more for chrome or patterned film. The five-door body and the 188.0 in (4,775 mm) length add labor compared with a smaller car. The charge port door and the tailgate glass also require careful trimming, which can raise the quote.

  • Film for a full wrap: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Electric car: the charge port door is wrapped as a small piece of its own.

Ocean wraps by generation

Swipe sideways. Tap a card for the full description.

Fisker Ocean, first generation, factory photo
Factory color shown

2021–now Ocean SUV (first generation)

2021–nowSUV (5 doors)188.0 in (4,775 mm)

The first generation Fisker Ocean is a five-door SUV with a length of 188.0 in (4,775 mm). This size means a full wrap takes about 66 ft (20 m) of 60-inch cast film, or 74 ft (22.5 m) with chrome or patterned film. The body is divided into large panels: hood, roof, five doors, front fenders, rear quarter panels, bumpers, and rockers. The tailgate includes the rear glass, so the film stops at the glass edge.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).

Roof, hood, chrome delete and PPF on an Ocean

A partial wrap on the Ocean can cover the roof, hood, or mirror caps without a full color change. Ocean chrome delete replaces the bright window trim and badges with black film, giving the SUV a darker look. Paint protection film (PPF) is a clear option that shields the front end from stone chips and scratches. These smaller jobs use less material and focus on specific areas of the five-door body.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Fisker Ocean: body, cut-outs and film

A Fisker Ocean vinyl wrap covers a five-door SUV body that measures 188.0 in (4,775 mm) long. The wide roof and tall tailgate increase the amount of film compared with a smaller crossover. Each door, the front fenders, and the rear quarter panels are wrapped as full panels. The large body panels reduce the number of seams on a full wrap.

Ocean wrap ideas often start with the tailgate, where the film ends at the edge of the rear glass. The charge port door is wrapped as a small piece of its own, which allows a clean cut around the opening. Door handles, mirror caps, and the shark-fin antenna are removed or masked before film is applied. The front bumper and the lower rocker panels need extra relief cuts to follow their deep shapes.

To work out how much vinyl to wrap an Ocean, a full color change on the first generation uses about 66 ft (20 m) of 60-inch film. If the design includes chrome or patterned film, the estimate rises to about 74 ft (22.5 m). The single generation produced from 2021 to now shares the same five-door SUV body. A wrap shop counts the roof, hood, five doors, fenders, bumpers, and rockers as separate sections.

Questions about wrapping a Fisker Ocean

How much vinyl does it take to wrap a Fisker Ocean?

A full vinyl wrap of a Fisker Ocean takes about 66 ft (20 m) of 60-inch (1.52 m) cast film. If the wrap uses chrome or patterned film, the amount rises to about 74 ft (22.5 m). These figures are based on the first generation SUV body produced from 2021 to now.

Can I wrap only the hood or the roof of an Ocean?

Yes, you can wrap only the hood or the roof of an Ocean. A partial wrap can also cover the mirror caps, while a chrome delete covers the window trim and badges. Paint protection film is another option for just the front end. These smaller jobs are a way to change or protect part of the car without a full wrap.

Is an Ocean hard to wrap?

An Ocean is not especially hard to wrap, but two details add work. The tailgate has the rear glass in it, so the film must end cleanly at the edge of the glass. The electric car's charge port door is wrapped as a small piece of its own, which requires careful trimming. The size of the SUV, at 188.0 in (4,775 mm), also means more film and more panels than a small car.

How many generations of the Ocean does this page cover?

This page covers one generation of the Fisker Ocean: the first generation, produced from 2021 to now. It has a five-door SUV body with a length of 188.0 in (4,775 mm). The wrap estimates are based on that single body style.