A matte brown Focus has no shine, which flattens the body lines and hides fingerprints better than other finishes. KPMF Brown Matt VWS Airelease liner K89081 in matte gives a consistent non-reflective finish. VViViD Army Brown Matte is another matte film whose tone leans more toward a milky brown. Satin films sit between matte and gloss, with a low sheen that still catches light on the Focus.
A gloss brown Focus has a clear-coated look that reflects light and makes the brown appear deeper. Aura Vinyl Gloss Brown A389 in gloss is a rich, uniform brown that resembles a high-quality paint job. Tinybot Gloss Midnight Mocha 7089 offers a darker gloss brown that shifts toward black in shade. Gloss films show surface preparation most clearly, so any paint chips need filling first.
A brown metallic Focus carries fine metal particles that sparkle in direct light and add depth to the color. VViViD ULTRA-GLOSS Caviar Brown Metallic in metallic has a coarse flake that stands out on the Focus body. Tinybot Metal Paint Chocolate 3071 is a metallic brown with a smoother, paint-like flake. Pearl films have a softer shimmer and can shift hue slightly between sun and shade.
Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.
Years
Body
Length
Film to order
2018–now
hatchback, sedan, wagon (4 or 5 doors)
172.5 in (4,382 mm) to 184.8 in (4,693 mm)
about 57 ft (17.5 m) for the sedan to 64 ft (19.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 74 ft (22.5 m)
2010–2019
hatchback, sedan, wagon (4 or 5 doors)
171.6 in (4,358 mm) to 179.4 in (4,556 mm)
about 56 ft (17 m) for the sedan to 62 ft (19 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 70 ft (21.5 m)
2004–2012
convertible, hatchback, sedan, wagon (2 or 3 or 4 or 5 doors)
170.9 in (4,341 mm) to 177.5 in (4,509 mm)
about 48 ft (14.5 m) for the convertible to 64 ft (19.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 74 ft (22.5 m)
1998–2005
hatchback, sedan, wagon (3 or 4 or 5 doors)
163.5 in (4,152 mm) to 174.7 in (4,438 mm)
about 48 ft (14.5 m) for the hatchback to 54 ft (16.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 67 ft (20.5 m)
Brown Focus wraps by generation
Swipe sideways. Tap a card for the full description.
Factory color shown
2018–now Focus (fourth generation): satin brown
2018–nowhatchback, sedan, wagon (4 or 5 doors)172.5 in (4,382 mm) to 184.8 in (4,693 mm)
A wrapped Focus of the fourth generation with the glass roof has the film ending at the roof rails on each side. The glass panel itself is not wrapped, so the roof stays dark whatever the color of the film around it. This leaves a sharp edge where brown film meets black glass, which many owners like. The installer plans the roof pieces so the edge follows the glass line cleanly.
Satin brown on this body shows the fourth-generation Focus creases with a soft satin sheen. A vinyl wrap in satin brown gives enough reflection to highlight the hood lines without the glare of gloss. The door skins on this body are tall and smooth, which makes satin look very even. For the wagon, the long roof needs a full-length seam placed at the rear.
Film: about 57 ft (17.5 m) for the sedan to 64 ft (19.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 74 ft (22.5 m).
Factory color shown
2010–2019 Focus (third generation): matte brown
2010–2019hatchback, sedan, wagon (4 or 5 doors)171.6 in (4,358 mm) to 179.4 in (4,556 mm)
A Focus wrapped matte brown on the third-generation body covers cars from 2010 to 2019. The third-generation Focus overlaps with the fourth generation from 2018 to 2019, so owners of those two years check which body their car is. The front bumper shapes are different between the two generations, so the film pattern is not interchangeable. Matte brown on this body looks especially flat on the older front end.
Matte brown on this body suits the third-generation Focus wagon because the flat finish reduces visual size. A wrap design in matte brown on the third generation works well with the black roof rails left as contrast. The hatchback's short rear section means fewer seams on the tailgate. On sedans from these years, matte brown helps hide the tall trunk lid.
Film: about 56 ft (17 m) for the sedan to 62 ft (19 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 70 ft (21.5 m).
Factory color shown
2004–2012 Focus (second generation): gloss brown
2004–2012convertible, hatchback, sedan, wagon (2 or 3 or 4 or 5 doors)170.9 in (4,341 mm) to 177.5 in (4,509 mm)
A gloss brown Focus of the second generation convertible keeps its fabric top unwrapped, so the film ends where the top begins. The folding hard top on some versions is wrapped as panels of its own in gloss brown. The body below the beltline takes a single gloss brown film from front to rear bumper. Gloss brown on the convertible highlights the body's rounder shapes.
Gloss brown on this body gives the second-generation Focus a wet look that matches the look of a clear-coated paint. A roof wrap in gloss brown is not used on the convertible, but the hardtop version's roof panels are wrapped. The sedan and wagon from this generation have a large roof that takes a full sheet of gloss brown. The hatchback's roofline breaks at the tailgate spoiler, so the film is split there.
Film: about 48 ft (14.5 m) for the convertible to 64 ft (19.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 74 ft (22.5 m).
Factory color shown
1998–2005 Focus (first generation): metallic brown
1998–2005hatchback, sedan, wagon (3 or 4 or 5 doors)163.5 in (4,152 mm) to 174.7 in (4,438 mm)
Wrap ideas for the first-generation Focus must account for paint age before wrapping in brown. A car from 1998 to 2005 may have original or repainted panels, and a test spot on each panel shows whether the film will stick. The test is done by applying a small piece of film and checking adhesion after a day. On failing paint, the wrap will pull the paint off when removed.
Metallic brown on this body brings the first-generation Focus hatchback out of the light colors often seen on this generation. The metallic brown Focus sedan looks close to a factory color from the period, but with much more flake. On the wagon, the long side panels show a uniform metallic brown sweep. The wrap installer uses knifeless tape on the door handles to keep edges clean.
Film: about 48 ft (14.5 m) for the hatchback to 54 ft (16.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 67 ft (20.5 m).
Partial brown wrap, chrome delete and PPF on a Focus
Brown partial wrap for the Focus
A partial wrap in brown on the Focus covers the hood, mirror caps, roof on cars without the glass panel, and the rear spoiler. For a typical car of this compact body, the roof needs about 4 m (13 ft) of film and the hood about 2.5 m (8 ft). The partial wrap changes the car's look without covering the whole body in brown. Mirror caps are small pieces that use leftover film.
Focus chrome delete
A chrome delete on the Focus covers the window trim and badges in gloss or satin black next to a brown body. This blackout treatment replaces bright factory trim with black film, which matches dark accents on the car. The badges are removed, wrapped, and reinstalled, or replaced with black ones. On a brown Focus, the black trim gives a sharp contrast.
Paint protection film on a Focus
Paint protection film (PPF) on the Ford Focus is a clear film applied to the front end, and it can go over a brown wrap. The PPF is nearly invisible and protects the brown wrap from stone chips on the hood and bumper. A matte version exists for matte or satin brown wraps to keep the same finish. The film is also removable and does not change the brown color.
Wrapping a Ford Focus in brown: film, fit and upkeep
Choosing a brown finish for a Focus wrapped in brown starts with how the color change should look at arm's length.
Factory paint still shows as a fine line in door jambs and panel gaps, unless the wrap includes those areas.
A brown wrap on the Focus is removable, so later paint correction or a new color remains possible with careful hand washing.
How much does it cost to wrap a Ford Focus in brown?
The cost to wrap a Ford Focus in brown depends on the film amount and the body length, from 48 ft (14.5 m) on the second-generation convertible to 64 ft (19.5 m) on wagons. The film line and finish also change the cost, with metallic and pearl films higher than solid colors. Labor and paint preparation are large parts of the cost, as the car must be clean and smooth. Wrapping the door jambs adds more film and labor.
Can a leased Focus be wrapped?
Yes, a leased Focus can be wrapped, but the film must be removed before the car is returned. The brown wrap protects the paint underneath, and removal should leave no damage if the paint was sound. Check the lease terms, as some agreements may restrict changes to the car. Keep the original paint color in mind when choosing the brown shade.
Will removing a brown wrap damage the factory paint?
No, removing a brown wrap from a Focus does not damage original factory paint that is in good condition. The paint was fully cured at the factory, so the adhesive does not bond into the clear coat. Damage happens when the paint is already chipped or peeling, and the wrap pulls the loose paint off. A professional removal uses heat and slow peeling to protect the surface.
How do I choose a wrap shop for the Focus?
Choose a wrap shop for the Focus by looking at their work on the same body style and by asking about seams and corners. The shop should show a portfolio of full color changes on Focus-sized cars. Ask which film brands they use and how they handle trim removal. A good shop offers a test spot before quoting the full job.
Does a brown wrap show dirt, heat or fading more than other colors?
Yes, a brown wrap on the Focus shows dirt and heat more visibly than lighter colors, but less than black. Dust and water spots are most visible on gloss brown, while matte brown hides fingerprints but shows dust. The surface gets warmer in the sun than a light color would, but no more than any dark finish. Fading is not a factor in choosing brown, as all colors are made with UV-stable pigments.
Can the roof of the Focus with the glass panel be wrapped?
Yes, the roof of a Focus with the glass panel can be wrapped around the glass. The wrap film ends at the edge of the glass and at the roof rails on cars that have them. The glass itself stays unwrapped and keeps its dark color. The installer cuts the film along the glass edge for a clean line.