Wraps by car

GAZ 24 wrap

The GAZ 24 wrap page covers the full sedan from two generations: the first built 1968–1987 and the second built 1985–1992. A full vinyl wrap of the newest body needs about 57 ft (17.5 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, the estimate rises to about 67 ft (20.5 m).

2generations17.5 mof film for a full wrap

GAZ 24, second generation, factory photo
GAZ 24, second generation. Factory color shown.

GAZ 24 wrap colors and ideas

  • GAZ 24 black wrap
  • GAZ 24 white wrap
  • GAZ 24 gray wrap
  • GAZ 24 silver wrap
  • GAZ 24 red wrap
  • GAZ 24 blue wrap
  • GAZ 24 green wrap
  • GAZ 24 yellow wrap
  • GAZ 24 orange wrap
  • GAZ 24 purple wrap
  • GAZ 24 pink wrap
  • GAZ 24 teal wrap
  • GAZ 24 brown wrap
  • GAZ 24 gold wrap
  • GAZ 24 chrome wrap
  • GAZ 24 color shift wrap
  • GAZ 24 carbon fiber wrap
  • GAZ 24 camo and patterned wrap

How much vinyl to wrap a GAZ 24

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1985–1992sedan (4 doors)186.4 in (4,735 mm)about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m)
1968–1987sedan (4 doors)186.4 in (4,735 mm)about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m)

GAZ 24 wrap cost factors

GAZ 24 wrap cost depends on the size of the car, the film you choose and the condition of the paint. A 186.4 in (4,735 mm) sedan with four doors needs about 57 ft (17.5 m) of film, which is the main material factor. Chrome or patterned film raises the amount to about 67 ft (20.5 m) and adds more cutting time. Paint prep on a car of these years can also change the labor, because old paint or repainted panels need more work before the film goes on.

  • Film for a full wrap: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).
  • Body: sedan (4 doors).

GAZ 24 wraps by generation

Swipe sideways. Tap a card for the full description.

GAZ 24, second generation, factory photo
Factory color shown

1985–1992 GAZ 24 sedan (second generation)

1985–1992sedan (4 doors)186.4 in (4,735 mm)

The second-generation GAZ 24, built 1985–1992, is the same size as the older body at 186.4 in (4,735 mm) with four doors. Paint age matters on a car of these years: panels may be original or repainted, and a test spot comes before a full wrap. A test spot tells you if the film will lift or if the paint is too weak to wrap safely.

Film: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).

GAZ 24, first generation, factory photo
Factory color shown

1968–1987 GAZ 24 sedan (first generation)

1968–1987sedan (4 doors)186.4 in (4,735 mm)

The first-generation GAZ 24, built 1968–1987, covers a sedan that overlaps with the newer body from 1985 to 1987. The owner of a car from those years checks which body it is because both were sold at the same time. The length is the same at 186.4 in (4,735 mm), but the trim details and paint condition differ.

Film: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).

Roof, hood, chrome delete and PPF on a GAZ 24

A partial wrap on a GAZ 24 can cover just the roof, the hood or the mirror caps. Chrome delete means the bright window trim and badges get covered with black film. Paint protection film (PPF) as a clear film on the front end guards the nose and leading hood edge from stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a GAZ 24: body, cut-outs and film

A GAZ 24 vinyl wrap covers one sedan body style with four doors and a length of 186.4 in (4,735 mm). The long flat roof and upright sides make panel layout straightforward, but you still need to plan seams around the door gaps and the trunk lid. Since both generations share this size, the same cut list works for a 1968 car and a 1992 car.

GAZ 24 wrap ideas start with removing or cutting around the front and rear bumpers, the door handles, the mirrors and the side moldings. The window trim and badges can stay if you trim around them, or you can remove them for chrome delete. The grille and headlight surrounds need careful relief cuts because the film has to follow tight chrome curves.

When you work out how much vinyl to wrap a GAZ 24, the second generation (1985–1992) and the first generation (1968–1987) need the same amount: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film for a color change. Chrome or patterned film takes about 67 ft (20.5 m) because the pattern has to run in one direction. The only extra on the older body is checking paint on the test spot before you measure.

Questions about wrapping a GAZ 24

How much vinyl does it take to wrap a GAZ 24?

A GAZ 24 needs about 57 ft (17.5 m) of 60-inch (1.52 m) cast film for a full wrap. For chrome or patterned film the amount is about 67 ft (20.5 m). This figure covers the whole sedan including the roof, pillars and trunk.

Can I wrap only the hood or the roof of a GAZ 24?

Yes, you can wrap only the hood or the roof of a GAZ 24. A partial wrap can cover just the hood, the roof, the mirror caps or any combination of those panels. This is a smaller job than a full wrap and uses less film.

Is a GAZ 24 hard to wrap?

A GAZ 24 is not the hardest car to wrap, but the long 186.4 in (4,735 mm) body and the chrome trim add work. The bumpers, window trim, badges and side moldings need cut-outs or removal. The roof and hood are large flat panels that need two people to handle the film without wrinkles.

How many generations of the GAZ 24 does this page cover?

This page covers two generations of the GAZ 24. The first generation was built 1968–1987 and the second generation from 1985–1992.