A Geely EX5 wrapped in gray is a full color change over the factory paint. Start by choosing the finish, because matte, satin and gloss gray read very differently on the EX5's large panels. Then pick a film line within that finish based on the depth of color and the surface feel you want. Decide last whether to wrap the whole body or leave the roof, mirrors or bumpers in the original paint. The hood, doors and tailgate are the most visible panels, so their film choice sets the look.
The factory paint under a gray wrap stays hidden and protected while the film is on the car. Seams are normally hidden at the edges of panels, so the gray film looks like a repaint unless you look inside the door jambs. On the EX5, the wrap stops at the rear glass edge because the tailgate has the glass in it, which keeps the film line clean. The charge port door is wrapped as a small piece of its own, so it opens without pulling the film.
A gray wrap on the Geely EX5 is removable when you want a change or before returning a lease. Use a hand wash with a soft mitt and a mild soap, because brushes can lift the edges of the film. The gray color makes dust and water spots less obvious than on a black car, but dried soap still shows as streaks. Rinse the car well and dry it with a clean microfiber cloth to keep the film looking even.