Wraps by car

GP Madison wrap

A GP Madison wrap changes the look of the 1980–1999 sports car with vinyl wrap on every painted panel. The first generation was offered as a coupe and a convertible, so a full wrap uses about 39 ft (12 m) to 46 ft (14 m) of 60-inch (1.52 m) cast film. A chrome or patterned film can push the total to about 54 ft (16.5 m).

1generations12 mof film for a full wrap

GP Madison, first generation, factory photo
GP Madison, first generation. Factory color shown.

GP Madison wrap colors and ideas

  • Madison black wrap
  • Madison white wrap
  • Madison gray wrap
  • Madison silver wrap
  • Madison red wrap
  • Madison blue wrap
  • Madison green wrap
  • Madison yellow wrap
  • Madison orange wrap
  • Madison purple wrap
  • Madison pink wrap
  • Madison teal wrap
  • Madison brown wrap
  • Madison gold wrap
  • Madison chrome wrap
  • Madison color shift wrap
  • Madison carbon fiber wrap
  • Madison camo and patterned wrap

How much vinyl to wrap a GP Madison

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1980–1999convertible, coupe (2 doors)147.6 in (3,750 mm) to 148.0 in (3,760 mm)about 39 ft (12 m) for the coupe to 46 ft (14 m) for the convertible, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 54 ft (16.5 m)

Madison wrap cost factors

The main factors in a Madison wrap cost are the body style and the film you choose. The convertible takes about 46 ft (14 m) of 60-inch (1.52 m) cast film, while the coupe needs about 39 ft (12 m). A chrome or patterned film can raise the total to about 54 ft (16.5 m), and the installer's time changes with cut-outs around trim and lights.

  • Film for a full wrap: about 39 ft (12 m) for the coupe to 46 ft (14 m) for the convertible, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 54 ft (16.5 m).
  • Body: convertible, coupe (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • Two long side doors: each door is one large piece of film.

Madison wraps by generation

Swipe sideways. Tap a card for the full description.

GP Madison, first generation, factory photo
Factory color shown

1980–1999 Madison convertible, coupe (first generation)

1980–1999convertible, coupe (2 doors)147.6 in (3,750 mm) to 148.0 in (3,760 mm)

On a first-generation Madison convertible, the open top is not wrapped when it is fabric. The film ends where the fabric top begins, so the installer cuts a clean line at the base of the roof. If the car has a folding hard top, that top is wrapped as panels of its own, with seams at the panel edges.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Two long side doors: each door is one large piece of film.

Film: about 39 ft (12 m) for the coupe to 46 ft (14 m) for the convertible, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 54 ft (16.5 m).

Roof, hood, chrome delete and PPF on a Madison

A partial wrap on a GP Madison can cover the roof, hood, or mirror caps with a single accent color. A Madison chrome delete replaces bright window trim and badges with black film for a cleaner look. Paint protection film (PPF) is a clear front-end film that protects the hood, fenders, and bumper on this sports car.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a GP Madison: body, cut-outs and film

The GP Madison vinyl wrap covers a compact body, with the coupe measuring 147.6 in (3,750 mm) and the convertible 148.0 in (3,760 mm) in length. Both styles have two long side doors, each of which is done as one large piece of film. The short overhangs and simple curves make a clean install and reduce wasted film.

Madison wrap ideas often start with the long side doors, because they are the largest panels on the car. The convertible has either a fabric top or a folding hard top, and no film goes over a fabric roof. The hard top is wrapped as separate panels, and the film ends where the top meets the body.

To know how much vinyl to wrap a Madison, first decide between the coupe and the convertible. The coupe uses about 39 ft (12 m) of 60-inch (1.52 m) cast film. The convertible uses about 46 ft (14 m), and a chrome or patterned film can need up to about 54 ft (16.5 m).

Questions about wrapping a GP Madison

How much vinyl does it take to wrap a GP Madison?

A full wrap of a GP Madison takes about 39 ft (12 m) to 46 ft (14 m) of 60-inch (1.52 m) cast film, depending on the body style. The coupe is at the low end of that range and the convertible at the high end. A chrome or patterned film can need up to about 54 ft (16.5 m).

Is the top of a Madison wrapped?

The top of a Madison is not wrapped if it is a fabric convertible roof. The film ends where the fabric begins, and the installer leaves the top exposed. A folding hard top is wrapped as its own set of panels.

Which Madison body takes more film?

The Madison convertible takes more film than the coupe, about 46 ft (14 m) versus 39 ft (12 m) of 60-inch (1.52 m) cast film. The extra film goes to the rear deck and the areas around the top mechanism. A chrome or patterned film can raise both numbers to about 54 ft (16.5 m).

Can I wrap only the hood or the roof of a Madison?

Yes, you can wrap only the hood or the roof of a Madison as a partial wrap. Mirror caps are another small section that works well on their own. A chrome delete covers just the window trim and badges, while paint protection film (PPF) goes only on the front end.