A Hongqi H9 wrapped in purple is a color change that hides the factory paint and protects it underneath. Choose the finish first because matte, satin, and gloss read differently on large flat panels. Then pick a cast film that can follow the deep contours around the doors and rear haunches. Finally decide between a full wrap or leaving the roof and pillars in the original color.
Factory paint gives the installer a smooth base, so the main concern is stone chips and deep scratches that show through the film. Wet sanding and polishing before wrapping prevent small defects from becoming visible under gloss film. Seams are hidden along body lines, under the door edges, and behind the grille where the bumper meets the fenders. The long hood and large doors need wide film rolls to avoid extra seams on flat areas.
The wrap is removable without leaving adhesive when the paint was factory original and properly prepared. Use a hand wash or touchless wash because brushes can lift edges and dull the film surface. Rinse road salt and bird droppings off the rocker panels and lower doors before they etch the film. A detailer can steam and re-tack a lifted edge before dirt works under the film.