Wraps by car

HuangHai Plutus wrap

The HuangHai Plutus wrap guide covers the first-generation pickup produced from 2007 to 2011. A full vinyl wrap of this vehicle takes about 66 ft (20 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, plan on about 74 ft (22.5 m).

1generations20 mof film for a full wrap

HuangHai Plutus, first generation, factory photo
HuangHai Plutus, first generation. Factory color shown.

HuangHai Plutus wrap colors and ideas

  • Plutus black wrap
  • Plutus white wrap
  • Plutus gray wrap
  • Plutus silver wrap
  • Plutus red wrap
  • Plutus blue wrap
  • Plutus green wrap
  • Plutus yellow wrap
  • Plutus orange wrap
  • Plutus purple wrap
  • Plutus pink wrap
  • Plutus teal wrap
  • Plutus brown wrap
  • Plutus gold wrap
  • Plutus chrome wrap
  • Plutus color shift wrap
  • Plutus carbon fiber wrap
  • Plutus camo and patterned wrap

How much vinyl to wrap a HuangHai Plutus

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2007–2011pickup (4 doors)200.6 in (5,095 mm)about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m)

Plutus wrap cost factors

The Plutus wrap cost depends mainly on the size of the vehicle at 200.6 in (5,095 mm) long. The pickup bed adds extra film and labor because it is wrapped as a second body after the cab. The choice between cast film and chrome or patterned film also changes the amount of material, from 66 ft (20 m) to 74 ft (22.5 m).

  • Film for a full wrap: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).
  • Body: pickup (4 doors).
  • A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.

Plutus wraps by generation

Swipe sideways. Tap a card for the full description.

HuangHai Plutus, first generation, factory photo
Factory color shown

2007–2011 Plutus pickup (first generation)

2007–2011pickup (4 doors)200.6 in (5,095 mm)

The first-generation Plutus (2007–2011) has a pickup bed, so the cab and the bed are treated as two separate bodies for the film. The inside of the bed stays bare, so no film is needed there. This separation means you order enough material to cover both exterior areas without overestimating.

A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.

Film: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).

Roof, hood, chrome delete and PPF on a Plutus

On a Plutus, a partial wrap can cover the roof, hood, and mirror caps only. You can also choose a chrome delete for the window trim and badges, using black film over the bright parts. Clear paint protection film (PPF) is another option for the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a HuangHai Plutus: body, cut-outs and film

The HuangHai Plutus vinyl wrap must account for its 200.6 in (5,095 mm) length and pickup body style. The cab and the bed are wrapped as two separate bodies, so you measure and cut film for each part independently. The four-door cab has large flat panels that suit wrapping, but the bed adds significant surface area.

Plutus wrap ideas often start with a color change on the cab, leaving the bed as a contrasting or matching section. You can also cover the hood, roof, and mirror caps in a different finish for a partial look. The window trim and badges are good candidates for a chrome delete, which covers bright trim with black film.

To know how much vinyl to wrap a Plutus, you compare the 2007–2011 first generation with other pickups of similar length. Since the catalog has only one generation, there are no later changes in dimensions or body style to adjust for. The 200.6 in (5,095 mm) length and the separate bed make the 66 ft (20 m) estimate dependable.

Questions about wrapping a HuangHai Plutus

How much vinyl does it take to wrap a HuangHai Plutus?

It takes about 66 ft (20 m) of 60-inch (1.52 m) cast film to wrap a HuangHai Plutus. If you use chrome or patterned film, plan for about 74 ft (22.5 m). The estimate is for the first-generation body from 2007 to 2011.

Is the bed of a Plutus wrapped?

No, the inside of the bed of a Plutus is not wrapped. The cab and the bed are wrapped as two separate bodies, but the bed's interior stays bare. Only the exterior surfaces of the bed are covered with film.

Can I wrap only the hood or the roof of a Plutus?

Yes, you can wrap only the hood or the roof of a Plutus. A partial wrap typically includes the roof, hood, and mirror caps, but you can choose any of those panels alone. This is a smaller job than a full wrap and uses less film.

Is a Plutus hard to wrap?

A Plutus is not especially hard to wrap, but the separate pickup bed adds work because it is treated as a second body. The 200.6 in (5,095 mm) length means more surface area than a shorter vehicle. The inside of the bed is left bare, which simplifies the process slightly.