Wraps by car

Hudson Super Six wrap

The Hudson Super Six wrap page covers the full-size first generation, production years 1916 to 1928. A full wrap of this sedan body takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast vinyl film. Chrome or patterned film increases the material estimate to about 69 ft (21 m).

1generations18.5 mof film for a full wrap

Hudson Super Six, first generation, factory photo
Hudson Super Six, first generation. Factory color shown.

Hudson Super Six wrap colors and ideas

  • Super Six black wrap
  • Super Six white wrap
  • Super Six gray wrap
  • Super Six silver wrap
  • Super Six red wrap
  • Super Six blue wrap
  • Super Six green wrap
  • Super Six yellow wrap
  • Super Six orange wrap
  • Super Six purple wrap
  • Super Six pink wrap
  • Super Six teal wrap
  • Super Six brown wrap
  • Super Six gold wrap
  • Super Six chrome wrap
  • Super Six color shift wrap
  • Super Six carbon fiber wrap
  • Super Six camo and patterned wrap

How much vinyl to wrap a Hudson Super Six

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1916–1928sedan (4 doors)176.0 in (4,470 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)

Super Six wrap cost factors

The Super Six wrap cost depends mainly on the large size of this full-size sedan and its height. With a body 176.0 in (4,470 mm) long and 85.0 in (2,160 mm) tall, installers need a platform for the roof. The choice between cast film and chrome or patterned film also changes the amount of material needed.

  • Film for a full wrap: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).
  • Body: sedan (4 doors).
  • A tall body (85.0 in (2,160 mm)): the roof is wrapped from a platform.

Super Six wraps by generation

Swipe sideways. Tap a card for the full description.

Hudson Super Six, first generation, factory photo
Factory color shown

1916–1928 Super Six sedan (first generation)

1916–1928sedan (4 doors)176.0 in (4,470 mm)

The first generation Hudson Super Six has a body height of 85.0 in (2,160 mm), so the roof is wrapped from a platform. This extra step takes more time than wrapping the lower panels. The long hood and tall sides also add material to the overall job.

A tall body (85.0 in (2,160 mm)): the roof is wrapped from a platform.

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Roof, hood, chrome delete and PPF on a Super Six

Instead of a full wrap, a partial wrap on a Super Six can cover the roof, hood, or mirror caps. Super Six chrome delete covers window trim and badges with black film for a different look. Paint protection film (PPF) is another option, using clear film on the front end.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Hudson Super Six: body, cut-outs and film

The Hudson Super Six vinyl wrap starts with a four-door sedan body that is 176.0 in (4,470 mm) long. The tall body height of 85.0 in (2,160 mm) means the roof must be wrapped from a platform. This size and shape add time and material compared with smaller cars.

Super Six wrap ideas include a full color change wrap or a chrome delete covering bright trim with black film. The tall roof and long hood are the main large panels to cover. Door handles and side trim need careful cutting for a clean finish.

To figure how much vinyl to wrap a Super Six, note that this page lists one generation only. The single body style is a four-door sedan built from 1916 to 1928, so film estimates do not change between years. A full wrap of the sedan uses about 61 ft (18.5 m) of 60-inch film.

Questions about wrapping a Hudson Super Six

How much vinyl does it take to wrap a Hudson Super Six?

A full Hudson Super Six wrap takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film, or about 69 ft (21 m) for chrome or patterned film. These figures are for the first generation four-door sedan. The tall body does not change the width of film used but adds to the total area.

Can I wrap only the hood or the roof of a Super Six?

Yes, you can wrap only the hood or the roof of a Super Six as a partial job. A partial wrap may cover the roof, hood, or mirror caps on their own. This reduces the film needed compared with a full wrap of the sedan.

Is a Super Six hard to wrap?

A Super Six is hard to wrap because of its height, with the roof at 85.0 in (2,160 mm) requiring a platform. The body is long at 176.0 in (4,470 mm), which adds time on the large panels. These size factors make it a demanding job for installers.

How many generations of the Super Six does this page cover?

This page covers one generation of the Hudson Super Six, produced from 1916 to 1928. The catalog has no other generations for this car. The single body style is a four-door sedan.