Wraps by car

Jaecoo J8 wrap

The Jaecoo J8 wrap page covers the first generation of this five-door SUV, produced from 2024 onward. A full vinyl wrap of the current body takes about 56 ft (17 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, plan for about 64 ft (19.5 m).

1generations17 mof film for a full wrap

Jaecoo J8, first generation, factory photo
Jaecoo J8, first generation. Factory color shown.

Jaecoo J8 wrap colors and ideas

  • Jaecoo J8 black wrap
  • Jaecoo J8 white wrap
  • Jaecoo J8 gray wrap
  • Jaecoo J8 silver wrap
  • Jaecoo J8 red wrap
  • Jaecoo J8 blue wrap
  • Jaecoo J8 green wrap
  • Jaecoo J8 yellow wrap
  • Jaecoo J8 orange wrap
  • Jaecoo J8 purple wrap
  • Jaecoo J8 pink wrap
  • Jaecoo J8 teal wrap
  • Jaecoo J8 brown wrap
  • Jaecoo J8 gold wrap
  • Jaecoo J8 chrome wrap
  • Jaecoo J8 color shift wrap
  • Jaecoo J8 carbon fiber wrap
  • Jaecoo J8 camo and patterned wrap

How much vinyl to wrap a Jaecoo J8

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2024–nowSUV (5 doors)189.8 in (4,820 mm)about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m)

Jaecoo J8 wrap cost factors

Jaecoo J8 wrap cost depends mainly on the size of the SUV: about 56 ft (17 m) of cast film for a full color change. The film brand and finish change the material cost, and chrome or patterned film needs about 64 ft (19.5 m). The labor is also higher because the roof rails come off or the film is cut along them. The wrap installer also cuts around parking sensors and wraps the charge port door on plug-in and electric versions.

  • Film for a full wrap: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Every trim has a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.
  • Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.

Jaecoo J8 wraps by generation

Swipe sideways. Tap a card for the full description.

Jaecoo J8, first generation, factory photo
Factory color shown

2024–now Jaecoo J8 SUV (first generation)

2024–nowSUV (5 doors)189.8 in (4,820 mm)

The first generation Jaecoo J8 has a panoramic glass roof on every trim, so the roof stays dark whatever the color of the film. The glass is not wrapped, and the film ends at the roof rails. This means a full wrap still leaves the glass area in its original black finish. The contrast can work well with a light color on the body.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.

Film: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).

Roof, hood, chrome delete and PPF on a Jaecoo J8

A partial wrap on a Jaecoo J8 can cover the hood, mirror caps, and tailgate. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These smaller jobs use less film than a full wrap.

  • Partial wrap: hood, mirror caps, tailgate.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Jaecoo J8: body, cut-outs and film

A Jaecoo J8 vinyl wrap has to cover a large five-door SUV body that is 189.8 in (4,820 mm) long. The tall sides and long roof add surface area, so the film is cut in large panels. The wrap installer works around the tailgate and the glass roof edges. The body size means the job takes more film than a smaller crossover.

Jaecoo J8 wrap ideas start with the roof: every trim has a panoramic glass roof, so the glass is not wrapped and the film ends at the roof rails. The roof rails themselves come off before the roof is wrapped, or the film is cut along them. Every trim also has parking sensors in the bumpers, and the film is cut around each sensor. Plug-in and electric versions have a charge port door that is wrapped as a small piece of its own.

When you count how much vinyl to wrap a Jaecoo J8, the first generation is the only body to measure. The estimate of 56 ft (17 m) covers the whole SUV, including the bumpers and the tailgate. The tailgate has the rear glass in it, so the film ends at the edge of the glass. A chrome or patterned film needs about 64 ft (19.5 m) because pattern matching adds waste.

Questions about wrapping a Jaecoo J8

How much vinyl does it take to wrap a Jaecoo J8?

A full wrap of a Jaecoo J8 takes about 56 ft (17 m) of 60-inch (1.52 m) cast vinyl. If you choose chrome or patterned film, the estimate is about 64 ft (19.5 m). The larger amount allows for pattern matching and waste on the big SUV panels.

Can the roof of a Jaecoo J8 be wrapped?

Yes, the roof of a Jaecoo J8 can be wrapped, but only the metal area around the panoramic glass. The glass itself is not wrapped, so the film ends at the roof rails. The roof rails come off first, or the installer cuts the film along them.

Can I wrap only the hood or the roof of a Jaecoo J8?

Yes, you can wrap only the hood or the roof of a Jaecoo J8. A partial wrap can include the hood, mirror caps, and tailgate. For the roof, the film goes on the metal sections around the glass. This is a smaller job than a full color change.

Is a Jaecoo J8 hard to wrap?

A Jaecoo J8 is not especially hard to wrap, but its size and details add work. The body is 189.8 in (4,820 mm) long, so large panels are needed. The roof rails have to come off or be cut around, and the parking sensors need cutouts. On plug-in and electric versions, the charge port door is a separate small piece.