Wraps by car

Kaiyi X3 pro wrap

The Kaiyi X3 pro wrap page covers the first generation SUV produced since 2021. A full vinyl wrap of this body takes about 59 ft (18 m) of 60-inch (1.52 m) cast film. The catalog includes chrome and patterned films which need about 67 ft (20.5 m). This single generation is the only body style in the catalog.

1generations18 mof film for a full wrap

Kaiyi X3 pro, first generation, factory photo
Kaiyi X3 pro, first generation. Factory color shown.

Kaiyi X3 pro wrap colors and ideas

  • X3 pro black wrap
  • X3 pro white wrap
  • X3 pro gray wrap
  • X3 pro silver wrap
  • X3 pro red wrap
  • X3 pro blue wrap
  • X3 pro green wrap
  • X3 pro yellow wrap
  • X3 pro orange wrap
  • X3 pro purple wrap
  • X3 pro pink wrap
  • X3 pro teal wrap
  • X3 pro brown wrap
  • X3 pro gold wrap
  • X3 pro chrome wrap
  • X3 pro color shift wrap
  • X3 pro carbon fiber wrap
  • X3 pro camo and patterned wrap

How much vinyl to wrap a Kaiyi X3 pro

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2021–nowSUV (5 doors)173.2 in (4,400 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m)

X3 pro wrap cost factors

X3 pro wrap cost depends on the size of the vehicle, the film you choose and the amount of disassembly the shop does. The body is 173.2 in (4,400 mm) long and needs about 59 ft (18 m) of 60-inch cast film for a full wrap. Partial jobs use less material but may have more edge work. The number of cutouts and the condition of the paint also affect the final figure.

  • Film for a full wrap: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

X3 pro wraps by generation

Swipe sideways. Tap a card for the full description.

Kaiyi X3 pro, first generation, factory photo
Factory color shown

2021–now X3 pro SUV (first generation)

2021–nowSUV (5 doors)173.2 in (4,400 mm)

The first generation Kaiyi X3 pro is an SUV from 2021 to now with a length of 173.2 in (4,400 mm). This body style has large side panels and a tall tailgate which increase the total film needed. The wrap estimate is about 59 ft (18 m) of 60-inch cast film for the standard color change. A chrome or patterned wrap adds extra because of the need for matching direction.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).

Roof, hood, chrome delete and PPF on an X3 pro

An X3 pro chrome delete can cover the window trim and badges with black film. Partial wrap on this SUV often includes the roof, hood or mirror caps as separate pieces. Paint protection film is a clear option that goes on the front end to guard against stone chips. These smaller jobs use less film than a full wrap and can change the look with less material.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Kaiyi X3 pro: body, cut-outs and film

The Kaiyi X3 pro vinyl wrap fits a five-door SUV with an overall length of 173.2 in (4,400 mm). The upright body and large panels mean more film than a small hatchback but the panel count is standard for an SUV. You will wrap the hood, roof, doors, fenders and tailgate as separate pieces. The length and height of the sides add up quickly when you measure for material.

X3 pro wrap ideas include color changes, chrome delete and partial wraps that use the SUV shape well. The tailgate has the rear glass set into it so the film ends at the edge of the glass, leaving a clean border. Door handles, mirrors and the antenna need to be removed or masked for a neat install. The front bumper and grille area need careful inlays because of the many openings.

How much vinyl to wrap an X3 pro depends on whether you have the first and only generation made from 2021 onward. The size of this SUV is the same across the production run, so the film estimate does not change between years. A full wrap takes about 59 ft (18 m) of 60-inch cast film on the standard body. Only the choice of film type changes the amount when you order chrome or patterned material.

Questions about wrapping a Kaiyi X3 pro

How much vinyl does it take to wrap a Kaiyi X3 pro?

A Kaiyi X3 pro takes about 59 ft (18 m) of 60-inch (1.52 m) cast film for a full wrap. The figure comes from the SUV body length of 173.2 in (4,400 mm). If you choose chrome or patterned film the amount goes up to about 67 ft (20.5 m). This is the estimate for the first generation body.

Can I wrap only the hood or the roof of an X3 pro?

Yes, you can wrap only the hood or the roof of an X3 pro. The partial job list includes the roof, hood and mirror caps as common single panel pieces. Chrome delete on the window trim and badges is another smaller option. These jobs use less film than a full wrap and are easier to schedule.

Is an X3 pro hard to wrap?

An X3 pro has one detail that adds work: the tailgate glass sits in the middle of the panel. The film must end at the edge of the glass, so you have an extra cut line on a large surface. The SUV size of 173.2 in (4,400 mm) means more material to handle than a small car. The rest of the body is fairly flat, which helps the installer.

How many generations of the X3 pro does this page cover?

This page covers one generation of the X3 pro. The catalog lists only the first generation, produced from 2021 to now. There are no other body styles or older generations in the data. The single generation makes the film estimate straightforward for any X3 pro.