Wraps by car

Karma Revero wrap

This page covers the Karma Revero wrap for the first generation sedan built from 2016 to 2021. A full vinyl wrap of the newest body takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film. The catalog lists one generation of the Karma Revero.

1generations17.5 mof film for a full wrap

Karma Revero, first generation, factory photo
Karma Revero, first generation. Factory color shown.

Karma Revero wrap colors and ideas

  • Revero black wrap
  • Revero white wrap
  • Revero gray wrap
  • Revero silver wrap
  • Revero red wrap
  • Revero blue wrap
  • Revero green wrap
  • Revero yellow wrap
  • Revero orange wrap
  • Revero purple wrap
  • Revero pink wrap
  • Revero teal wrap
  • Revero brown wrap
  • Revero gold wrap
  • Revero chrome wrap
  • Revero color shift wrap
  • Revero carbon fiber wrap
  • Revero camo and patterned wrap

How much vinyl to wrap a Karma Revero

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2016–2021sedan (4 doors)196.8 in (4,998 mm)about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m)

Revero wrap cost factors

The Revero wrap cost depends on the size of the sedan, the finish of the film, and the amount of disassembly needed. A color change wrap on this 196.8 in (4,998 mm) car takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film, while chrome or patterned film needs about 74 ft (22.5 m). Removing parts like mirror caps and door handles adds labor time, and the charge port door on plug-in and electric versions is wrapped as a separate small piece.

  • Film for a full wrap: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).
  • Body: sedan (4 doors).
  • Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.

Revero wraps by generation

Swipe sideways. Tap a card for the full description.

Karma Revero, first generation, factory photo
Factory color shown

2016–2021 Revero sedan (first generation)

2016–2021sedan (4 doors)196.8 in (4,998 mm)

The first generation Karma Revero is a four-door sedan with a smooth, flowing body style that is straightforward to wrap. Its length of 196.8 in (4,998 mm) means the roof and side panels are long, so a full wrap uses about 57 ft (17.5 m) of 60-inch (1.52 m) cast film. The car has no sharp creases or complex flares, which keeps the number of vinyl pieces manageable for an experienced installer.

Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.

Film: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).

Roof, hood, chrome delete and PPF on a Revero

A partial wrap on the Karma Revero can cover the roof, hood, or mirror caps without changing the whole car. Revero chrome delete involves covering the window trim and badges with black film for a darker look. Paint protection film (PPF) in clear film on the front end shields the bumper, hood, and mirrors from stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Karma Revero: body, cut-outs and film

The Karma Revero vinyl wrap covers a four-door luxury sedan that measures 196.8 in (4,998 mm) long. Its smooth body lines and limited number of cut lines keep the panel count moderate for a car of this size. The full wrap uses about 57 ft (17.5 m) of 60-inch (1.52 m) film, which is typical for a long luxury sedan.

Revero wrap ideas should account for the charge port door on plug-in and electric versions, which is wrapped as a small piece of its own. Door handles, mirrors, and bumper sensors need careful cut-outs or removal before film is applied. The sedan body has few body claddings, but the front bumper and grille area require extra time for a clean finish.

For installers counting how much vinyl to wrap a Revero, the first generation stayed consistent in body size and panel layout. The 2016–2021 sedan kept the same overall length of 196.8 in (4,998 mm), so film estimates do not change between years. A wrap shop can order the same amount of film for any Revero from those production years.

Questions about wrapping a Karma Revero

How much vinyl does it take to wrap a Karma Revero?

A Karma Revero takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film for a full wrap. This estimate is for the first generation sedan built from 2016 to 2021. If you use chrome or patterned film, plan for about 74 ft (22.5 m).

Can I wrap only the hood or the roof of a Revero?

Yes, you can wrap only the hood or the roof of a Revero. A partial wrap on this sedan often includes the roof, hood, and mirror caps. You can also choose a chrome delete for the window trim and badges or a clear paint protection film on the front end.

Is a Revero hard to wrap?

The Karma Revero is not a hard car to wrap, but its length adds some work. At 196.8 in (4,998 mm), the roof and side panels are long, so you need enough material and a helper for large pieces. On plug-in and electric versions, the charge port door is wrapped as a separate small piece, which requires extra cutting and fitting.

How many generations of the Revero does this page cover?

This page covers one generation of the Karma Revero. The first generation sedan was produced from 2016 to 2021. No other generation is listed in this catalog.