Wraps by car

Lichi A01 wrap

The Lichi A01 wrap page covers the first generation of this mini electric hatchback, produced from 2013 to the present. A full vinyl wrap of the newest body takes about 30 ft (9 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, plan on about 38 ft (11.5 m) of 60-inch (1.52 m) material.

1generations9 mof film for a full wrap

Lichi A01, first generation, factory photo
Lichi A01, first generation. Factory color shown.

Lichi A01 wrap colors and ideas

  • Lichi A01 black wrap
  • Lichi A01 white wrap
  • Lichi A01 gray wrap
  • Lichi A01 silver wrap
  • Lichi A01 red wrap
  • Lichi A01 blue wrap
  • Lichi A01 green wrap
  • Lichi A01 yellow wrap
  • Lichi A01 orange wrap
  • Lichi A01 purple wrap
  • Lichi A01 pink wrap
  • Lichi A01 teal wrap
  • Lichi A01 brown wrap
  • Lichi A01 gold wrap
  • Lichi A01 chrome wrap
  • Lichi A01 color shift wrap
  • Lichi A01 carbon fiber wrap
  • Lichi A01 camo and patterned wrap

How much vinyl to wrap a Lichi A01

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2013–nowhatchback (3 doors)88.6 in (2,250 mm)about 30 ft (9 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 38 ft (11.5 m)

Lichi A01 wrap cost factors

The Lichi A01 wrap cost is driven by the car's small size and simple three-door body, which require less film than larger vehicles. The base estimate is about 30 ft (9 m) of 60-inch (1.52 m) cast film, while chrome or patterned film uses about 38 ft (11.5 m) of the same width. Additional factors include the number of cut-outs, such as the charge port door and rear glass, and the installer's labor for the large side panels.

  • Film for a full wrap: about 30 ft (9 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 38 ft (11.5 m).
  • Body: hatchback (3 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Two long side doors: each door is one large piece of film.
  • Electric car: the charge port door is wrapped as a small piece of its own.

Lichi A01 wraps by generation

Swipe sideways. Tap a card for the full description.

Lichi A01, first generation, factory photo
Factory color shown

2013–now Lichi A01 hatchback (first generation)

2013–nowhatchback (3 doors)88.6 in (2,250 mm)

The first generation Lichi A01 is a three-door hatchback measuring 88.6 in (2,250 mm) long, which places it in the mini class. Its small size means a full wrap needs about 30 ft (9 m) of 60-inch (1.52 m) cast film, with a higher estimate for specialty films. The body has relatively few panels: two large side doors, a tailgate, hood, roof, and bumpers.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 30 ft (9 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 38 ft (11.5 m).

Roof, hood, chrome delete and PPF on a Lichi A01

A partial wrap on a Lichi A01 can cover the roof, hood, or mirror caps for a focused change. A chrome delete applies black film to the window trim and badges, while paint protection film (PPF) is a clear film applied to the front end. These smaller jobs use less material than a full wrap and can be completed without wrapping the large side doors.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Lichi A01: body, cut-outs and film

The Lichi A01 vinyl wrap is shaped by the car's compact three-door hatchback design and its length of 88.6 in (2,250 mm). The two long side doors are each wrapped as one large piece of film, which makes handling easier but requires careful squeegee work. The tailgate includes the rear glass, so the film ends at the edge of the glass.

Lichi A01 wrap ideas must work around the charge port door, which is wrapped as a small separate piece on this electric car. The tailgate has the rear glass built in, so the wrap stops at the glass edge rather than covering the whole panel. The long side doors are large single pieces, meaning you should plan for extra material to avoid seams.

How much vinyl to wrap a Lichi A01 depends on the single generation in this catalog, which has kept the same three-door hatchback body since 2013. Because there are no major body changes, the film estimate of about 30 ft (9 m) of 60-inch (1.52 m) cast film applies to every year. For chrome or patterned films, allow about 38 ft (11.5 m) of 60-inch (1.52 m) material.

Questions about wrapping a Lichi A01

How much vinyl does it take to wrap a Lichi A01?

It takes about 30 ft (9 m) of 60-inch (1.52 m) cast film to wrap a Lichi A01. For chrome or patterned film, you need about 38 ft (11.5 m) of 60-inch (1.52 m) material.

Can I wrap only the hood or the roof of a Lichi A01?

Yes, you can wrap only the hood or the roof of a Lichi A01. A partial wrap of the roof, hood, or mirror caps is a standard option for this car.

Is a Lichi A01 hard to wrap?

A Lichi A01 is not especially hard to wrap, but it has some detailed areas. The charge port door is wrapped as a small piece of its own, and the tailgate film ends at the edge of the rear glass. The two long side doors are large single panels, which take extra care to apply without trapped air.

How many generations of the Lichi A01 does this page cover?

This page covers one generation of the Lichi A01. The first generation has been in production from 2013 to the present with the same three-door hatchback body.