A Lifan Solano wrapped in gray changes the exterior color without using paint, so the original factory paint stays protected underneath. The first choice is the finish, because satin and matte read differently on the Solano's flat sides than high gloss. The second choice is the film line, since some brands offer shorter rolls that add seams on a sedan of this size. A full color change also covers the door jambs, which adds a second work stage to the job.
The factory paint on a Lifan Solano should be clean, dry and free of chips before the film goes on, because film does not hide deep damage. On the 2010–2016 cars a test spot on the rear quarter shows whether older paint will hold the adhesive. The first-generation Solano has park distance sensors on some trims, so the installer cuts the film around each sensor for the seams to look tidy. The second-generation Solano can also carry cameras, and the film is trimmed around every lens.
A gray wrap on a Lifan Solano is removable without sanding or repainting, which matters if you sell the car later. Hand washing with a soft mitt and a pH-neutral shampoo is the safe way to clean the film. Pressure washing at a low setting and a 45-degree angle is fine, but you keep the nozzle away from film edges. Avoid automatic car washes with rotating brushes because they can lift the wrap at the mirrors and rocker panels.
