Wraps by car

Lordstown Endurance wrap

The Lordstown Endurance wrap is a vinyl wrap job on a full-size electric pickup that is currently in its first generation, covering 2020 to now. This body is a four-door pickup with a 230.0 in (5,842 mm) overall length. A full wrap of the newest body needs about 77 ft (23.5 m) of 60-inch (1.52 m) cast film, or about 87 ft (26.5 m) for chrome or patterned film.

1generations23.5 mof film for a full wrap

Lordstown Endurance, first generation, factory photo
Lordstown Endurance, first generation. Factory color shown.

Lordstown Endurance wrap colors and ideas

  • Endurance black wrap
  • Endurance white wrap
  • Endurance gray wrap
  • Endurance silver wrap
  • Endurance red wrap
  • Endurance blue wrap
  • Endurance green wrap
  • Endurance yellow wrap
  • Endurance orange wrap
  • Endurance purple wrap
  • Endurance pink wrap
  • Endurance teal wrap
  • Endurance brown wrap
  • Endurance gold wrap
  • Endurance chrome wrap
  • Endurance color shift wrap
  • Endurance carbon fiber wrap
  • Endurance camo and patterned wrap

How much vinyl to wrap a Lordstown Endurance

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2020–nowpickup (4 doors)230.0 in (5,842 mm)about 77 ft (23.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 87 ft (26.5 m)

Endurance wrap cost factors

The Endurance wrap cost depends on the amount of film and the labor involved with a 230.0 in (5,842 mm) pickup. A full wrap takes about 77 ft (23.5 m) of cast film, while chrome or patterned film raises the material to about 87 ft (26.5 m). The tall roof, at 76.4 in (1,941 mm), adds time because the installer must work from a platform.

  • Film for a full wrap: about 77 ft (23.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 87 ft (26.5 m).
  • Body: pickup (4 doors).
  • A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.
  • Electric car: the charge port door is wrapped as a small piece of its own.
  • A tall body (76.4 in (1,941 mm)): the roof is wrapped from a platform.

Endurance wraps by generation

Swipe sideways. Tap a card for the full description.

Lordstown Endurance, first generation, factory photo
Factory color shown

2020–now Endurance pickup (first generation)

2020–nowpickup (4 doors)230.0 in (5,842 mm)

The first generation of the Lordstown Endurance, built from 2020 to now, is a four-door pickup with a separate cab and bed. For wrapping, the cab and the bed are two bodies for the film, and the inside of the bed stays bare. This generation includes the charge port door as a small wrapped piece on the electric truck.

A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.

Electric car: the charge port door is wrapped as a small piece of its own.

A tall body (76.4 in (1,941 mm)): the roof is wrapped from a platform.

Film: about 77 ft (23.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 87 ft (26.5 m).

Roof, hood, chrome delete and PPF on an Endurance

A partial wrap on an Endurance can cover the roof, hood, or mirror caps, while an Endurance chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is also available as a clear film on the front end to guard against stone chips. These smaller jobs are useful when a full color change wrap is not needed.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Lordstown Endurance: body, cut-outs and film

A Lordstown Endurance vinyl wrap treats the cab and the bed as two separate bodies because the pickup bed interrupts the surface. The truck's tall body, 76.4 in (1,941 mm), means the roof is wrapped from a platform rather than from the ground. Since the inside of the bed is not wrapped, the film estimate covers only the exterior panels of the cab and the bed sides and tailgate.

Endurance wrap ideas include two-tone designs that use the pickup bed line as a natural break between colors. When planning the wrap, the charge port door is wrapped as a small piece of its own so the port can open and close cleanly. The roof may be wrapped in a contrasting color, but installers need a platform to reach it safely.

To know how much vinyl to wrap an Endurance, use the first-generation figure of about 77 ft (23.5 m) of 60-inch (1.52 m) cast film for a standard color change. Because there is only one generation in the catalog, there are no earlier body styles with different lengths to compare. If the wrap uses chrome or patterned film, expect to need about 87 ft (26.5 m).

Questions about wrapping a Lordstown Endurance

How much vinyl does it take to wrap a Lordstown Endurance?

A Lordstown Endurance takes about 77 ft (23.5 m) of 60-inch (1.52 m) cast film for a full wrap of the newest body. If you use chrome or patterned film, the amount rises to about 87 ft (26.5 m) because of additional overlaps.

Is the bed of an Endurance wrapped?

No, the inside of the bed is not wrapped. The cab and the bed exterior are wrapped as two separate bodies, but the bed interior stays bare.

Can I wrap only the hood or the roof of an Endurance?

Yes, you can wrap only the hood or the roof of an Endurance as a partial wrap. Roof, hood, and mirror caps are common partial wrap areas, along with chrome delete and paint protection film on the front end.

Is an Endurance hard to wrap?

An Endurance adds work for wrappers because of its size and electric-car details. The 230.0 in (5,842 mm) length and 76.4 in (1,941 mm) height mean more film and a platform for the roof. The charge port door must be wrapped as a separate small piece, and the pickup bed splits the job into two main surfaces.