Wraps by car

Lucid Gravity wrap

The Lucid Gravity wrap guide covers the full body of this electric SUV and the vinyl wrap film a complete color change needs. The Gravity has been produced in one generation since 2022. A full wrap of the first generation takes about 67 ft (20.5 m) of 60-inch (1.52 m) cast film. This estimate includes the roof, pillars, and all painted surfaces.

1generations20.5 mof film for a full wrap

Lucid Gravity, first generation, factory photo
Lucid Gravity, first generation. Factory color shown.

Lucid Gravity wrap colors and ideas

  • Gravity black wrap
  • Gravity white wrap
  • Gravity gray wrap
  • Gravity silver wrap
  • Gravity red wrap
  • Gravity blue wrap
  • Gravity green wrap
  • Gravity yellow wrap
  • Gravity orange wrap
  • Gravity purple wrap
  • Gravity pink wrap
  • Gravity teal wrap
  • Gravity brown wrap
  • Gravity gold wrap
  • Gravity chrome wrap
  • Gravity color shift wrap
  • Gravity carbon fiber wrap
  • Gravity camo and patterned wrap

How much vinyl to wrap a Lucid Gravity

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2022–nowSUV (5 doors)198.2 in (5,034 mm)about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m)

Gravity wrap cost factors

Gravity wrap cost is set by the size of the film and the finish you choose, not by a fixed price. The car is 198.2 in (5,034 mm) long, so a full color change uses about 67 ft (20.5 m) of 60-inch film for a solid color. A chrome or patterned vinyl raises the amount to about 76 ft (23 m). The number of cut-outs, such as the charge port door and the tailgate glass, also affects the work involved.

  • Film for a full wrap: about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Electric car: the charge port door is wrapped as a small piece of its own.

Gravity wraps by generation

Swipe sideways. Tap a card for the full description.

Lucid Gravity, first generation, factory photo
Factory color shown

2022–now Gravity SUV (first generation)

2022–nowSUV (5 doors)198.2 in (5,034 mm)

The first generation Lucid Gravity is a five-door SUV with a body that is 198.2 in (5,034 mm) long. That length means the installer works with long side panels and a large roof area. The tailgate with integrated glass requires a precise cut around the window edge. This generation is the only one in production, so film estimates stay the same for all Gravity models.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).

Roof, hood, chrome delete and PPF on a Gravity

A partial wrap on the Lucid Gravity can be limited to the roof, hood, or mirror caps for a smaller color accent. Gravity chrome delete covers the window trim and badges with black film instead of bright metal. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips. Each of these jobs uses far less material than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Lucid Gravity: body, cut-outs and film

The Lucid Gravity vinyl wrap is a project on a vehicle that measures 198.2 in (5,034 mm) in length. The SUV body style gives the installer large flat panels along the sides and a tall tailgate. These surfaces are straightforward to cover, while the roof and the area around the rear glass need careful planning. The doors are long, so each side uses nearly a full width of 60-inch film.

Gravity wrap ideas begin with the two details that change the installation on this car. The tailgate carries the rear glass to its edge, so the film must end cleanly at the glass line. The electric charge port door is wrapped as a separate small piece, which keeps the cable access neat. Removing the door handles and the exterior mirror caps gives a cleaner edge around those parts.

How much vinyl to wrap a Gravity depends on the kind of film you order. A solid-color cast film needs about 67 ft (20.5 m) on a 60-inch (1.52 m) roll. Chrome or patterned film with a directional design takes about 76 ft (23 m) because the installer has to match the pattern. The Gravity has only one generation in this catalog, so the same estimate applies to every year of production.

More Lucid wraps

Questions about wrapping a Lucid Gravity

How much vinyl does it take to wrap a Lucid Gravity?

A full wrap of a Lucid Gravity takes about 67 ft (20.5 m) of 60-inch (1.52 m) cast film. That figure is for a solid color with no pattern matching. If you choose chrome or patterned vinyl, the estimate rises to about 76 ft (23 m).

Can I wrap only the hood or the roof of a Gravity?

Yes, you can wrap only the hood or the roof of a Gravity. A partial wrap on the roof, hood, or mirror caps is a standard job that uses much less film than a full color change. The hood is a large panel, so it needs about 6 to 8 ft of 60-inch film depending on the exact shape. The roof is longer and requires about 9 to 10 ft of film on the same roll width.

Is a Gravity hard to wrap?

A Gravity is moderately hard to wrap because of its size and two specific features. The tailgate glass runs to the edge, so the installer must trim the film precisely at the glass line. The charge port door is wrapped as a separate piece, which adds a cut-out and a small panel. The body is 198.2 in (5,034 mm) long, so the roof and the lower rockers take extra time to cover.

How many generations of the Gravity does this page cover?

This page covers one generation of the Lucid Gravity. The first generation has been produced since 2022 and is the only generation in the catalog. The film estimate of about 67 ft (20.5 m) applies to that generation.