Wraps by car

Luxeed S7 wrap

The Luxeed S7 wrap page covers the first generation of this mid-size electric sedan, produced from 2023 to now. A full vinyl wrap of the sedan body takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film. If the design uses chrome or patterned film, plan for about 74 ft (22.5 m) because the film has to be matched at the seams.

1generations18.5 mof film for a full wrap

Luxeed S7, first generation, factory photo
Luxeed S7, first generation. Factory color shown.

Luxeed S7 wrap colors and ideas

  • Luxeed S7 black wrap
  • Luxeed S7 white wrap
  • Luxeed S7 gray wrap
  • Luxeed S7 silver wrap
  • Luxeed S7 red wrap
  • Luxeed S7 blue wrap
  • Luxeed S7 green wrap
  • Luxeed S7 yellow wrap
  • Luxeed S7 orange wrap
  • Luxeed S7 purple wrap
  • Luxeed S7 pink wrap
  • Luxeed S7 teal wrap
  • Luxeed S7 brown wrap
  • Luxeed S7 gold wrap
  • Luxeed S7 chrome wrap
  • Luxeed S7 color shift wrap
  • Luxeed S7 carbon fiber wrap
  • Luxeed S7 camo and patterned wrap

How much vinyl to wrap a Luxeed S7

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2023–nowsedan (4 doors)195.7 in (4,971 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m)

Luxeed S7 wrap cost factors

Luxeed S7 wrap cost depends on the size of the car and the film you pick. A standard color change on the 195.7 in (4,971 mm) sedan uses about 61 ft (18.5 m) of 60-inch (1.52 m) cast film. A chrome or patterned film needs about 74 ft (22.5 m) plus extra labor to match the pattern at the seams.

  • Film for a full wrap: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).
  • Body: sedan (4 doors).
  • Electric car: the charge port door is wrapped as a small piece of its own.

Luxeed S7 wraps by generation

Swipe sideways. Tap a card for the full description.

Luxeed S7, first generation, factory photo
Factory color shown

2023–now Luxeed S7 sedan (first generation)

2023–nowsedan (4 doors)195.7 in (4,971 mm)

The first generation Luxeed S7 is a mid-size sedan with a body length of 195.7 in (4,971 mm). Because it is a four-door sedan, the installer has to wrap four doors, two bumpers, the hood, the roof, and the trunk lid. The wrap job is one of the shortest on a car this size because the roof is a simple panel.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).

Roof, hood, chrome delete and PPF on a Luxeed S7

A partial wrap on a Luxeed S7 can cover the roof, the hood, and the mirror caps without wrapping the whole car. A chrome delete on this car means the window trim and the badges are covered with black film, so no bright metal shows. Paint protection film (PPF) is a clear film that goes on the front end only, from the bumper to the leading edge of the hood.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Luxeed S7: body, cut-outs and film

A Luxeed S7 vinyl wrap covers a four-door sedan that is 195.7 in (4,971 mm) long, which is a normal size for a mid-size sedan. The body has the usual large panels: hood, roof, trunk lid, four doors, fenders, and bumpers. The roof is a single panel without a sunroof frame, which keeps the film use lower than on a car with a panoramic roof.

For Luxeed S7 wrap ideas, the car has no visible door handles that need cut-outs, because the handles sit flush with the body. The charge port door on the fender is wrapped as a small piece of its own, so the installer does not have to cut around it. The side mirrors come off, and the badges and trim are removed to keep the film edge invisible.

If you ask how much vinyl to wrap a Luxeed S7, the answer is the body of this single generation has not changed since 2023. The length stays 195.7 in (4,971 mm) and the body style is always the same four-door sedan. The amount of film is the same for every Luxeed S7 on the road today.

Questions about wrapping a Luxeed S7

How much vinyl does it take to wrap a Luxeed S7?

A full wrap of a Luxeed S7 takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film. If the wrap uses a chrome or patterned film, the amount goes up to about 74 ft (22.5 m) because the pattern has to be matched at the seams.

Can I wrap only the hood or the roof of a Luxeed S7?

Yes, the hood or the roof of a Luxeed S7 can be wrapped on their own as a partial wrap. The roof is a simple panel with no sunroof cut-out, and the hood is a single piece. A partial wrap is also a common way to add a contrasting color to the car without covering every panel.

Is a Luxeed S7 hard to wrap?

A Luxeed S7 is not hard to wrap for a shop with experience on sedans. The main extra work is the charge port door, which is wrapped as a small separate piece so it can open. The flush door handles do not need cut-outs, and the roof is a simple panel without a sunroof.

How many generations of the Luxeed S7 does this page cover?

This page covers one generation of the Luxeed S7, the first generation from 2023 onwards. The car has not changed body style or size since it was introduced.