Wraps by car

Lynk & Co 900 wrap

This page covers the Lynk & Co 900 wrap in vinyl wrap. The Lynk & Co 900 has one generation in our catalog. A full wrap of the newest body takes about 69 ft (21 m) of 60-inch (1.52 m) cast film.

1generations21 mof film for a full wrap

Lynk & Co 900, first generation, factory photo
Lynk & Co 900, first generation. Factory color shown.

Lynk & Co 900 wrap colors and ideas

  • Lynk & Co 900 black wrap
  • Lynk & Co 900 white wrap
  • Lynk & Co 900 gray wrap
  • Lynk & Co 900 silver wrap
  • Lynk & Co 900 red wrap
  • Lynk & Co 900 blue wrap
  • Lynk & Co 900 green wrap
  • Lynk & Co 900 yellow wrap
  • Lynk & Co 900 orange wrap
  • Lynk & Co 900 purple wrap
  • Lynk & Co 900 pink wrap
  • Lynk & Co 900 teal wrap
  • Lynk & Co 900 brown wrap
  • Lynk & Co 900 gold wrap
  • Lynk & Co 900 chrome wrap
  • Lynk & Co 900 color shift wrap
  • Lynk & Co 900 carbon fiber wrap
  • Lynk & Co 900 camo and patterned wrap

How much vinyl to wrap a Lynk & Co 900

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2025–nowSUV (5 doors)206.3 in (5,240 mm)about 69 ft (21 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 87 ft (26.5 m)

Lynk & Co 900 wrap cost factors

The Lynk & Co 900 wrap cost depends on the film and the labor. A standard color change uses about 69 ft (21 m) of 60-inch (1.52 m) cast film. The tall roof adds time, and chrome delete requires extra cutting around the window trim.

  • Film for a full wrap: about 69 ft (21 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 87 ft (26.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.
  • A tall body (71.3 in (1,810 mm)): the roof is wrapped from a platform.

Lynk & Co 900 wraps by generation

Swipe sideways. Tap a card for the full description.

Lynk & Co 900, first generation, factory photo
Factory color shown

2025–now Lynk & Co 900 SUV (first generation)

2025–nowSUV (5 doors)206.3 in (5,240 mm)

The first generation Lynk & Co 900 has a tall body, so the roof is wrapped from a platform and takes more time. The roof height is 71.3 in (1,810 mm), which means the installer works above shoulder level. That adds labor compared with a lower SUV.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.

A tall body (71.3 in (1,810 mm)): the roof is wrapped from a platform.

Film: about 69 ft (21 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 87 ft (26.5 m).

Roof, hood, chrome delete and PPF on a Lynk & Co 900

A partial wrap on a Lynk & Co 900 can cover the roof, hood, or mirror caps. Chrome delete is a common choice for the window trim and badges. Paint protection film (PPF) is clear film on the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Lynk & Co 900: body, cut-outs and film

The Lynk & Co 900 is an SUV with 5 doors, and its size affects how a vinyl wrap is planned. The body is 206.3 in (5,240 mm) long, so installers work panel by panel. The tall roof and large side panels make the job closer to a large SUV than a sedan.

The Lynk & Co 900 wrap ideas begin with the tailgate that includes the rear glass. The film ends at the edge of the glass, so painters tape is used to mask the seal. The charge port door on plug-in and electric versions is wrapped as a small piece of its own.

How much vinyl to wrap a Lynk & Co 900 depends on the year. The first generation runs from 2025 to now. Since there is only one generation, the film estimate stays the same for all Lynk & Co 900 SUVs.

Questions about wrapping a Lynk & Co 900

How much vinyl does it take to wrap a Lynk & Co 900?

It takes about 69 ft (21 m) of 60-inch (1.52 m) cast film for a full Lynk & Co 900 wrap. That figure is for the first generation body. Chrome or patterned film needs about 87 ft (26.5 m).

Can I wrap only the hood or the roof of a Lynk & Co 900?

Yes, you can wrap only the hood or the roof of a Lynk & Co 900. A partial wrap can include the roof, hood, or mirror caps. Many owners choose just the roof for a two-tone look.

Is a Lynk & Co 900 hard to wrap?

A Lynk & Co 900 is not the easiest vehicle to wrap due to its height and tailgate design. The roof is wrapped from a platform, which adds time. The tailgate has the rear glass in it, so the film must end precisely at the glass edge.

How many generations of the Lynk & Co 900 does this page cover?

This page covers one generation of the Lynk & Co 900. The first generation runs from 2025 to now. All wrapping details on this page refer to that generation.