Wraps by car

Mercedes EQV wrap

This page covers the Mercedes EQV wrap, one generation from 2020 to now. The van is 202.4 in (5,140 mm) to 211.4 in (5,370 mm) long, so a full vinyl wrap uses about 79 ft (24 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, plan for about 95 ft (29 m). This size makes the EQV a straightforward candidate for a color change wrap.

1generations24 mof film for a full wrap

Mercedes EQV, first generation, factory photo
Mercedes EQV, first generation. Factory color shown.

Mercedes EQV wrap colors and ideas

  • Mercedes EQV black wrap
  • Mercedes EQV white wrap
  • Mercedes EQV gray wrap
  • Mercedes EQV silver wrap
  • Mercedes EQV red wrap
  • Mercedes EQV blue wrap
  • Mercedes EQV green wrap
  • Mercedes EQV yellow wrap
  • Mercedes EQV orange wrap
  • Mercedes EQV purple wrap
  • Mercedes EQV pink wrap
  • Mercedes EQV teal wrap
  • Mercedes EQV brown wrap
  • Mercedes EQV gold wrap
  • Mercedes EQV chrome wrap
  • Mercedes EQV color shift wrap
  • Mercedes EQV carbon fiber wrap
  • Mercedes EQV camo and patterned wrap

How much vinyl to wrap a Mercedes EQV

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2020–nowvan (5 doors)202.4 in (5,140 mm) to 211.4 in (5,370 mm)about 79 ft (24 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 95 ft (29 m)

Mercedes EQV wrap cost factors

Mercedes EQV wrap cost depends on the size of the van and the film you choose. The body is 202.4 in (5,140 mm) to 211.4 in (5,370 mm) long, so more film and more labor go into a full wrap. Chrome or patterned film uses about 95 ft (29 m) instead of 79 ft (24 m) of standard cast film. The wrap shop will also account for the sliding door tracks and the cameras that need cut-outs.

  • Film for a full wrap: about 79 ft (24 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 95 ft (29 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Electric car: the charge port door is wrapped as a small piece of its own.
  • A tall body (74.8 in (1,901 mm)): the roof is wrapped from a platform.

Mercedes EQV wraps by generation

Swipe sideways. Tap a card for the full description.

Mercedes EQV, first generation, factory photo
Factory color shown

2020–now Mercedes EQV van (first generation)

2020–nowvan (5 doors)202.4 in (5,140 mm) to 211.4 in (5,370 mm)

The first generation Mercedes EQV, built from 2020 to now, is the only body style in our catalog. The sliding side doors are the main wrap challenge: the tracks stay bare and decide where the film is cut. The van's length of up to 211.4 in (5,370 mm) means the installer works panel by panel. A full wrap of this generation needs about 79 ft (24 m) of 60-inch (1.52 m) cast film.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Every trim has cameras in the body: the film is cut around each lens.

Electric car: the charge port door is wrapped as a small piece of its own.

A tall body (74.8 in (1,901 mm)): the roof is wrapped from a platform.

Film: about 79 ft (24 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 95 ft (29 m).

Roof, hood, chrome delete and PPF on a Mercedes EQV

For the Mercedes EQV, a partial wrap can cover the roof, hood, or mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film that protects the front end from stone chips. These jobs use less film than a full wrap and still change the look of the van.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Mercedes EQV: body, cut-outs and film

A Mercedes EQV vinyl wrap must handle a five-door van body with sliding side doors. The length varies between 202.4 in (5,140 mm) and 211.4 in (5,370 mm), which changes how much film each panel needs. The tall body of 74.8 in (1,901 mm) means the roof is not an easy reach from the ground. A full wrap of this car takes careful measurement and panel-by-panel work.

Mercedes EQV wrap ideas start with the sliding side doors, where the film is cut along the door tracks. Every trim has cameras in the body, so the film is cut around each lens to keep them clear. The electric charge port door is wrapped as a small piece of its own, so you can open and close it normally. The tall body means the roof is wrapped from a platform for even coverage.

Knowing how much vinyl to wrap a Mercedes EQV comes down to the generation you have. The only generation in our catalog runs from 2020 to now, so the film estimate is about 79 ft (24 m) of 60-inch (1.52 m) cast film. If you add chrome or patterned film, the estimate rises to about 95 ft (29 m). These figures cover the whole van body, including the roof and doors.

Questions about wrapping a Mercedes EQV

How much vinyl does it take to wrap a Mercedes EQV?

It takes about 79 ft (24 m) of 60-inch (1.52 m) cast film to wrap a Mercedes EQV. If you choose chrome or patterned film, the estimate is about 95 ft (29 m). These figures cover the entire van body, including the roof and sliding doors.

Are the sliding doors of a Mercedes EQV wrapped?

Yes, the sliding doors of a Mercedes EQV are wrapped, but the door tracks stay bare. The film is cut along the tracks so the doors can open and close freely. The tracks themselves are not covered because they need clearance.

Can I wrap only the hood or the roof of a Mercedes EQV?

Yes, you can wrap only the hood or the roof of a Mercedes EQV. A partial wrap on this van often covers the roof, hood, or mirror caps. A chrome delete covers the window trim and badges, and paint protection film can be applied to the front end.

Is a Mercedes EQV hard to wrap?

A Mercedes EQV is not hard to wrap for an installer who knows vans, but it adds work. The sliding side door tracks must stay bare, so the film is cut along them. Every trim has cameras in the body that need cut-outs, and the tall body of 74.8 in (1,901 mm) means the roof is wrapped from a platform.