Choosing a color change for the SL-Class AMG starts with the finish, then the film, then full or partial coverage. For a full wrap of the SL-Class AMG, allow about 49 ft (15 m) of 60-inch (1.52 m) cast film on the newest body, while a chrome or patterned film needs about 56 ft (17 m). The film estimate varies by generation: the first and second generations use about 48 ft (14.5 m) of 60-inch (1.52 m) cast film, and the third generation uses about 49 ft (15 m). On every trim of the 2021 model, flush door handles and a rear spoiler are wrapped as separate pieces, which adds labor but gives a clean result.
Factory paint color affects preparation before the orange film goes on, especially on older SL-Class AMG cars with repainted panels. The installer looks for chips, scratches, and rust, because the film shows every defect in the surface. Seams are placed at panel edges or body lines, and on the SL-Class AMG every trim of the fourth generation has parking sensors in the bumpers, so the film is cut around each sensor. On the third generation, some trims have parking sensors as well, and cut-outs are needed there too.
An orange wrap on the SL-Class AMG is removable and does not change the factory paint underneath. The film can be taken off later by a professional, leaving the original color as it was before installation. For washing a wrapped SL-Class AMG, hand wash with a mild automotive soap and a soft mitt. Avoid automatic car washes with brushes, and dry with a clean microfiber towel to protect the film.


