Wraps by car

Metrocab Metrocab II wrap

The Metrocab Metrocab II wrap page covers the full-size hatchback produced from 2001 to 2006. This page has one generation on file. A full wrap of this body takes about 59 ft (18 m) of 60-inch (1.52 m) cast film.

1generations18 mof film for a full wrap

Metrocab Metrocab II, first generation, factory photo
Metrocab Metrocab II, first generation. Factory color shown.

Metrocab Metrocab II wrap colors and ideas

  • Metrocab II black wrap
  • Metrocab II white wrap
  • Metrocab II gray wrap
  • Metrocab II silver wrap
  • Metrocab II red wrap
  • Metrocab II blue wrap
  • Metrocab II green wrap
  • Metrocab II yellow wrap
  • Metrocab II orange wrap
  • Metrocab II purple wrap
  • Metrocab II pink wrap
  • Metrocab II teal wrap
  • Metrocab II brown wrap
  • Metrocab II gold wrap
  • Metrocab II chrome wrap
  • Metrocab II color shift wrap
  • Metrocab II carbon fiber wrap
  • Metrocab II camo and patterned wrap

How much vinyl to wrap a Metrocab Metrocab II

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2001–2006hatchback (5 doors)177.4 in (4,505 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m)

Metrocab II wrap cost factors

A Metrocab II wrap cost depends on film choice and the size of this full-size hatchback. The 177.4-inch length and 69.1-inch height mean more material than a compact car. Using chrome or patterned film raises the amount to about 67 ft (20.5 m).

  • Film for a full wrap: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • A tall body (69.1 in (1,755 mm)): the roof is wrapped from a platform.

Metrocab II wraps by generation

Swipe sideways. Tap a card for the full description.

Metrocab Metrocab II, first generation, factory photo
Factory color shown

2001–2006 Metrocab II hatchback (first generation)

2001–2006hatchback (5 doors)177.4 in (4,505 mm)

The first generation Metrocab II spans 2001 to 2006 and is the only body this page covers. Its tall body of 69.1 in (1,755 mm) means the roof is wrapped from a platform. That height adds time to any full wrap job.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

A tall body (69.1 in (1,755 mm)): the roof is wrapped from a platform.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).

Roof, hood, chrome delete and PPF on a Metrocab II

A partial wrap on a Metrocab II can cover the roof, hood, or mirror caps. Chrome delete wraps the window trim and badges in black film. Paint protection film (PPF) is clear film applied to the front end.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Metrocab Metrocab II: body, cut-outs and film

A Metrocab Metrocab II vinyl wrap has to manage a five-door hatchback body 177.4 in (4,505 mm) long. The tall roof adds surface area and means working from a platform. The single body style keeps film calculations simple across all cars.

Metrocab II wrap ideas start with the tailgate that holds the rear glass in one unit. The film ends neatly at the edge of that glass. The body is 69.1 in (1,755 mm) tall, so the roof is wrapped from a platform. Door handles and mirrors are removed for clean edges.

To know how much vinyl to wrap a Metrocab II, count the one generation listed. There is no older or newer body to compare, so the figure stays the same. You need about 59 ft (18 m) of 60-inch film for solid color. Chrome or patterned film takes about 67 ft (20.5 m) because of extra waste.

More Metrocab wraps

Questions about wrapping a Metrocab Metrocab II

How much vinyl does it take to wrap a Metrocab Metrocab II?

A Metrocab Metrocab II takes about 59 ft (18 m) of 60-inch (1.52 m) cast film for a full wrap. For chrome or patterned film, plan about 67 ft (20.5 m). The tall hatchback body drives that figure.

Can I wrap only the hood or the roof of a Metrocab II?

Yes, you can wrap only the hood or the roof of a Metrocab II. Typical partial jobs are the roof, hood, and mirror caps. Chrome delete covers window trim and badges. Paint protection film goes on the front end.

Is a Metrocab II hard to wrap?

A Metrocab II is not the easiest car to wrap because of its tall, full-size body. At 69.1 in (1,755 mm) high, the roof needs a platform and extra time. The tailgate has the rear glass in it, so the film must end at the glass edge.

How many generations of the Metrocab II does this page cover?

This page covers one generation of the Metrocab II, produced from 2001 to 2006. The catalog does not list any other generation for this model.