Wraps by car

Microlino Spiaggina wrap

The Microlino Spiaggina wrap page covers the single first generation of this mini convertible, produced from 2024 to now. A full vinyl wrap of the newest body takes about 12 square meters (129 square feet) of film. The page explains how the open top changes the work and what a wrap involves on this electric car.

1generations

Microlino Spiaggina, first generation, factory photo
Microlino Spiaggina, first generation. Factory color shown.

Microlino Spiaggina wrap colors and ideas

  • Spiaggina black wrap
  • Spiaggina white wrap
  • Spiaggina gray wrap
  • Spiaggina silver wrap
  • Spiaggina red wrap
  • Spiaggina blue wrap
  • Spiaggina green wrap
  • Spiaggina yellow wrap
  • Spiaggina orange wrap
  • Spiaggina purple wrap
  • Spiaggina pink wrap
  • Spiaggina teal wrap
  • Spiaggina brown wrap
  • Spiaggina gold wrap
  • Spiaggina chrome wrap
  • Spiaggina color shift wrap
  • Spiaggina carbon fiber wrap
  • Spiaggina camo and patterned wrap

How much vinyl to wrap a Microlino Spiaggina

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2024–nowconvertible (2 doors)——

Spiaggina wrap cost factors

The Spiaggina wrap cost depends on the film area of about 12 square meters (129 square feet) and on the work around the fabric top. Installers also charge for the charge port door, which is wrapped as a separate small piece. The total is driven by the film type and the shop's labor rate, not by the car's price.

  • Body: convertible (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • Electric car: the charge port door is wrapped as a small piece of its own.

Spiaggina wraps by generation

Swipe sideways. Tap a card for the full description.

Microlino Spiaggina, first generation, factory photo
Factory color shown

2024–now Spiaggina convertible (first generation)

2024–nowconvertible (2 doors)

The first generation Microlino Spiaggina has a fabric top that is not wrapped, so the film ends where the top begins. The open body leaves no roof panels to cover, and the wrap stops at the top edge all around. The charge port door is wrapped as a small piece of its own so it can still open normally.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Electric car: the charge port door is wrapped as a small piece of its own.

Roof, hood, chrome delete and PPF on a Spiaggina

A partial wrap on the Spiaggina covers the hood, mirror caps, or rear deck, each as a single job. Chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips.

  • Partial wrap: hood, mirror caps, rear deck.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Microlino Spiaggina: body, cut-outs and film

The Microlino Spiaggina vinyl wrap fits a convertible mini with two doors, a body that is small enough for one roll of film. The fabric top is not wrapped, so the film ends where the top begins and the job stays clean. All body panels are flat and short, which makes cutting and laying film faster than on a larger car.

Spiaggina wrap ideas start with the electric charge port door, which is wrapped as a small piece of its own so it can open freely. The convertible body means the fabric top is left uncovered and the film stops at its edge. No bumpers or trim need to come off for the wrap, but the installer cuts around the door handles and badges.

How much vinyl to wrap a Spiaggina depends on the only body made so far, the first generation convertible. Since the car is new and has one body style, the film estimate is the same for every one: about 12 square meters (129 square feet). Nothing from older generations changes the count for this car.

More Microlino wraps

Questions about wrapping a Microlino Spiaggina

How much vinyl does it take to wrap a Microlino Spiaggina?

It takes about 12 square meters (129 square feet) of vinyl to wrap a Microlino Spiaggina. That figure comes from the film estimate of the newest body, which is the only generation. The small convertible body keeps the film use low.

Is the top of a Spiaggina wrapped?

No, the top of a Spiaggina is not wrapped. The fabric top is left uncovered, and the film ends where the top begins. A folding hard top would be wrapped as panels of its own, but this car has a fabric top.

Can I wrap only the hood or the roof of a Spiaggina?

Yes, you can wrap only the hood or the roof of a Spiaggina. A partial wrap covers the hood, mirror caps, or rear deck, each as a single job. Chrome delete is another option for the window trim and badges.

Is a Spiaggina hard to wrap?

A Spiaggina is not hard to wrap, but the fabric top and the charge port door add work. The installer must end the film cleanly at the top edge and wrap the charge port door as a small piece of its own. The small body size makes the rest of the job quicker than a larger car.