Wraps by car

Minelli TF 1800 wrap

This page covers the Minelli TF 1800 wrap, from film needs to the details of its convertible body. The Minelli TF 1800 is a sports car sold from 1998 to 2001. A full vinyl wrap of this first-generation convertible takes about 36 ft (11 m) of 60-inch (1.52 m) cast film.

1generations11 mof film for a full wrap

Minelli TF 1800, first generation, factory photo
Minelli TF 1800, first generation. Factory color shown.

Minelli TF 1800 wrap colors and ideas

  • Minelli TF 1800 black wrap
  • Minelli TF 1800 white wrap
  • Minelli TF 1800 gray wrap
  • Minelli TF 1800 silver wrap
  • Minelli TF 1800 red wrap
  • Minelli TF 1800 blue wrap
  • Minelli TF 1800 green wrap
  • Minelli TF 1800 yellow wrap
  • Minelli TF 1800 orange wrap
  • Minelli TF 1800 purple wrap
  • Minelli TF 1800 pink wrap
  • Minelli TF 1800 teal wrap
  • Minelli TF 1800 brown wrap
  • Minelli TF 1800 gold wrap
  • Minelli TF 1800 chrome wrap
  • Minelli TF 1800 color shift wrap
  • Minelli TF 1800 carbon fiber wrap
  • Minelli TF 1800 camo and patterned wrap

How much vinyl to wrap a Minelli TF 1800

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1998–2001convertible (2 doors)150.2 in (3,815 mm)about 36 ft (11 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 46 ft (14 m)

Minelli TF 1800 wrap cost factors

The Minelli TF 1800 wrap cost depends mainly on how much of the car is covered and the film chosen. A full wrap uses about 36 ft (11 m) of 60-inch (1.52 m) cast film, while chrome or patterned film needs about 46 ft (14 m). The installer's time goes up with cut-outs around lights, handles, and badges.

  • Film for a full wrap: about 36 ft (11 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 46 ft (14 m).
  • Body: convertible (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Minelli TF 1800 wraps by generation

Swipe sideways. Tap a card for the full description.

Minelli TF 1800, first generation, factory photo
Factory color shown

1998–2001 Minelli TF 1800 convertible (first generation)

1998–2001convertible (2 doors)150.2 in (3,815 mm)

The open top on the Minelli TF 1800 is a fabric roof that is never wrapped. The vinyl ends at the edge where the fabric top begins, following the line around the side windows. A folding hard top, if fitted, would be wrapped as separate panels.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 36 ft (11 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 46 ft (14 m).

Roof, hood, chrome delete and PPF on a Minelli TF 1800

A partial wrap on a Minelli TF 1800 can cover the hood, mirror caps, and rear deck. Chrome delete on this car means covering window trim and badges with black film. Paint protection film (PPF) is often put on the front end as a clear film.

  • Partial wrap: hood, mirror caps, rear deck.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Minelli TF 1800: body, cut-outs and film

A Minelli TF 1800 vinyl wrap has to follow the shape of a short two-door convertible. The car is 150.2 in (3,815 mm) long, so the sides are the main vinyl area. The fabric top cannot be wrapped, so the film ends cleanly where the top begins.

Minelli TF 1800 wrap ideas start with leaving the fabric roof uncovered. The wrap installer will cut around the door handles, lights, and badges. The mirrors and the rear deck are common panels for contrast colors.

How much vinyl to wrap a Minelli TF 1800 stays the same for all production years. This car has one generation, so the body size does not change. A full wrap needs about 36 ft (11 m) of 60-inch (1.52 m) cast film.

Questions about wrapping a Minelli TF 1800

How much vinyl does it take to wrap a Minelli TF 1800?

It takes about 36 ft (11 m) of 60-inch (1.52 m) cast film to wrap a Minelli TF 1800. That is the amount for a full color change wrap. If you use chrome or patterned film, plan for about 46 ft (14 m).

Is the top of a Minelli TF 1800 wrapped?

No, the fabric top of a Minelli TF 1800 is not wrapped. The vinyl wrap ends where the fabric top begins. A folding hard top would be wrapped as panels of its own.

Can I wrap only the hood or the roof of a Minelli TF 1800?

Yes, a partial wrap on a Minelli TF 1800 can cover just the hood and the rear deck. Mirror caps are another small job that changes the look. The roof is fabric and is not wrapped.

Is a Minelli TF 1800 hard to wrap?

A Minelli TF 1800 is not the hardest car to wrap, but the convertible body adds work. The fabric top must be masked off so the vinyl ends cleanly at its edge. The car is short at 150.2 in (3,815 mm), so the panels are manageable.