Wraps by car

Minicar L7 wrap

A Minicar L7 wrap covers this mini pickup in vinyl wrap, and the catalog lists one generation made from 2021 to now. The full wrap of the newest body takes about 43 ft (13 m) of 60-inch (1.52 m) cast film. Chrome or patterned film needs about 49 ft (15 m).

1generations13 mof film for a full wrap

Minicar L7, first generation, factory photo
Minicar L7, first generation. Factory color shown.

Minicar L7 wrap colors and ideas

  • Minicar L7 black wrap
  • Minicar L7 white wrap
  • Minicar L7 gray wrap
  • Minicar L7 silver wrap
  • Minicar L7 red wrap
  • Minicar L7 blue wrap
  • Minicar L7 green wrap
  • Minicar L7 yellow wrap
  • Minicar L7 orange wrap
  • Minicar L7 purple wrap
  • Minicar L7 pink wrap
  • Minicar L7 teal wrap
  • Minicar L7 brown wrap
  • Minicar L7 gold wrap
  • Minicar L7 chrome wrap
  • Minicar L7 color shift wrap
  • Minicar L7 carbon fiber wrap
  • Minicar L7 camo and patterned wrap

How much vinyl to wrap a Minicar L7

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2021–nowpickup (2 doors)131.1 in (3,330 mm)about 43 ft (13 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m)

Minicar L7 wrap cost factors

A Minicar L7 wrap cost depends on the film type, the size of the vehicle, and how much disassembly is needed. The full wrap uses about 43 ft (13 m) of 60-inch (1.52 m) cast film, and chrome or patterned film needs about 49 ft (15 m). The pickup bed adds extra surface and the charge port door adds a small separate piece.

  • Film for a full wrap: about 43 ft (13 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m).
  • Body: pickup (2 doors).
  • A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.
  • Two long side doors: each door is one large piece of film.
  • Electric car: the charge port door is wrapped as a small piece of its own.

Minicar L7 wraps by generation

Swipe sideways. Tap a card for the full description.

Minicar L7, first generation, factory photo
Factory color shown

2021–now Minicar L7 pickup (first generation)

2021–nowpickup (2 doors)131.1 in (3,330 mm)

The first-generation Minicar L7 from 2021 to now has a pickup bed, so the cab and the bed are wrapped as two bodies. The inside of the bed stays bare, and the two long side doors each take one large piece of film. The charge port door is wrapped as a small piece of its own.

A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.

Two long side doors: each door is one large piece of film.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 43 ft (13 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m).

Roof, hood, chrome delete and PPF on a Minicar L7

A partial wrap on a Minicar L7 can cover the roof, hood, or mirror caps, and a chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips. These jobs are smaller than a full wrap and can be done on this pickup.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Minicar L7: body, cut-outs and film

The Minicar L7 vinyl wrap follows the pickup body with two doors, so the cab and the bed are treated as two separate surfaces. Its length of 131.1 in (3,330 mm) makes it a compact job, but the wrap still needs careful planning around the bed. The two long side doors are each covered with one large piece of film.

Minicar L7 wrap ideas include a color change on the cab and bed, chrome delete on bright trim, and clear paint protection film (PPF) on the front end. The charge port door is wrapped as a small piece of its own, and the window trim and badges can be covered with black film. The inside of the bed stays bare.

How much vinyl to wrap a Minicar L7 depends on the film type: 43 ft (13 m) of 60-inch (1.52 m) cast film for a standard color change. Chrome or patterned film adds about 6 ft (2 m) for a total of about 49 ft (15 m), because the pattern or finish needs extra care. The pickup bed and the cab are measured as two bodies.

Questions about wrapping a Minicar L7

How much vinyl does it take to wrap a Minicar L7?

It takes about 43 ft (13 m) of 60-inch (1.52 m) cast film to wrap a Minicar L7. That figure covers the standard vinyl wrap of the newest body. If you choose chrome or patterned film, you need about 49 ft (15 m).

Is the bed of a Minicar L7 wrapped?

No, the inside of the bed of a Minicar L7 is not wrapped. The cab and the outside of the bed are covered as two bodies. The inside of the bed stays bare because it is a working surface.

Can I wrap only the hood or the roof of a Minicar L7?

Yes, you can wrap only the hood or the roof of a Minicar L7. A partial wrap can cover the roof, hood, or mirror caps. These smaller jobs use less film than a full wrap.

Is a Minicar L7 hard to wrap?

A Minicar L7 wrap adds work because it is a pickup with a separate bed and a charge port door. The cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped. The two long side doors each require one large piece of film.