Wraps by car

Nammi 01 wrap

This page covers the Nammi 01, a mini electric hatchback with one generation. The first generation runs from 2023 to now and has a five-door hatchback body. A full wrap of this newest body takes about 52 ft (16 m) of 60-inch (1.52 m) cast vinyl wrap.

1generations16 mof film for a full wrap

Nammi 01, first generation, factory photo
Nammi 01, first generation. Factory color shown.

Nammi 01 wrap colors and ideas

  • Nammi 01 black wrap
  • Nammi 01 white wrap
  • Nammi 01 gray wrap
  • Nammi 01 silver wrap
  • Nammi 01 red wrap
  • Nammi 01 blue wrap
  • Nammi 01 green wrap
  • Nammi 01 yellow wrap
  • Nammi 01 orange wrap
  • Nammi 01 purple wrap
  • Nammi 01 pink wrap
  • Nammi 01 teal wrap
  • Nammi 01 brown wrap
  • Nammi 01 gold wrap
  • Nammi 01 chrome wrap
  • Nammi 01 color shift wrap
  • Nammi 01 carbon fiber wrap
  • Nammi 01 camo and patterned wrap

How much vinyl to wrap a Nammi 01

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2023–nowhatchback (5 doors)158.7 in (4,030 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m)

Nammi 01 wrap cost factors

Nammi 01 wrap cost depends on the film amount, the film type, and the labor for preparation. A full color change uses about 52 ft (16 m) of 60-inch (1.52 m) cast film, while chrome or patterned film needs about 62 ft (19 m). The charge port door and the tailgate glass edge add small pieces of labor. The cost also changes with the number of panels removed and reinstalled.

  • Film for a full wrap: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Electric car: the charge port door is wrapped as a small piece of its own.

Nammi 01 wraps by generation

Swipe sideways. Tap a card for the full description.

Nammi 01, first generation, factory photo
Factory color shown

2023–now Nammi 01 hatchback (first generation)

2023–nowhatchback (5 doors)158.7 in (4,030 mm)

The first generation Nammi 01 is a five-door hatchback that is 158.7 in (4,030 mm) long. This compact size means a full wrap takes about 52 ft (16 m) of 60-inch (1.52 m) film. The car has the usual panel count for a hatchback: hood, roof, four doors, tailgate, and bumpers. The tailgate includes the rear glass, so the film stops at the glass edge.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).

Roof, hood, chrome delete and PPF on a Nammi 01

A partial wrap on a Nammi 01 can cover the roof, hood, or mirror caps. A Nammi 01 chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These smaller jobs use less film than a full wrap and can be done in stages.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Nammi 01: body, cut-outs and film

A Nammi 01 vinyl wrap means covering a compact five-door hatchback. The car is 158.7 in (4,030 mm) long, so the wrap uses less film than a larger vehicle. The five doors and the tailgate create six main side panels plus the roof and bumpers. Its mini class dimensions keep the panel count manageable for one installer.

Nammi 01 wrap ideas start with knowing the two tricky areas. The tailgate has the rear glass in it, so the film ends at the edge of the glass. The charge port door is an electric car feature and is wrapped as a small piece of its own. Removing the door handles and mirrors gives cleaner edges around those cut-outs.

How much vinyl to wrap a Nammi 01 depends on the generation, and there is only one. The first generation from 2023 to now needs about 52 ft (16 m) of 60-inch (1.52 m) film for a color change. If you choose chrome or patterned film, plan for about 62 ft (19 m). The hatchback body style keeps the amount of film lower than on a larger car.

Questions about wrapping a Nammi 01

How much vinyl does it take to wrap a Nammi 01?

It takes about 52 ft (16 m) of 60-inch (1.52 m) vinyl to wrap a Nammi 01 for a full color change. If you use chrome or patterned film, plan for about 62 ft (19 m). These figures cover the first generation, which is the only generation of this car.

Can I wrap only the hood or the roof of a Nammi 01?

Yes, you can wrap only the hood or the roof of a Nammi 01. A partial wrap commonly covers the roof, hood, or mirror caps. You can also do a chrome delete on the window trim and badges or apply paint protection film to the front end.

Is a Nammi 01 hard to wrap?

A Nammi 01 is not hard to wrap, but two areas add a little work. The tailgate has the rear glass in it, so the film must end neatly at the edge of the glass. The charge port door is wrapped as a small separate piece because it is an electric car. The car's compact size makes the overall job quicker than on a larger vehicle.

How many generations of the Nammi 01 does this page cover?

This page covers one generation of the Nammi 01. The first generation has been produced from 2023 to now. It is the only generation in the catalog, so all wrap information here applies to that body.